国产三线在线,亚洲久草在线视频,9久re热视频在线精品,久久久xxx

 

所有價格以美元報價。不包括海關關稅，增值稅和其他費用。

All prices are quoted in USD, excluding customs duties, taxes and other charges.

 

100%不可撤銷保兌信用證，見運單即付，允許轉運。

100% by irrevocable and confirmed letter of credit, permitting transshipment, payable at sight against air way bill (AWB) consigned to the applicant,

信用證開具以采購合同為依據，議付有效期21天。

Letter of Credit has to be opened with clear Purchase Order and allowing 21 days for documents presentations to the Bank.

 

交貨期為收到合同（包括明確的技術附件協議）和預付款（或開具信用證）后3個月內。如果由于買方原因要求延遲發貨，由買方承擔設備倉儲的費用和風險。
Time of delivery is within 3 month after receipt of the purchase order, down payment or irrevocable confirmed letter of credit, as well as clarification of all technical details. Should the delivery be delayed for reasons caused by the purchaser and storage be required, the goods will be stored at the purchaser’s risk and expense.

 

在收到全部合同款項前，設備的所有權屬于斯派克分析儀器公司。

All goods remain the property of SPECTRO Analytical Instruments until full payment has been received.

 

保修期為驗收后12個月或從德國發票日期之日起18個月，以先到者為準。除因用戶使用不當造成的損壞以外，保修期內，德國斯派克分析儀器公司負責為用戶免費維修或更換相應損壞部件。

The warranty period is 12 months after acceptance or 18 month from invoice date, whatever occurs first. All faulty components will be repaired or replaced free of charge, except for damages caused by customer's negligence.

 

合同總價包括安裝調試，安裝現場培訓，設備移交用戶。

The total price includes installation, commissioning of the analytical instrument and a basic training of its operation.

額外的應用支持和培訓需要收費。設備移交以設備驗收為終結。驗收展示分析系統的完美運行，儀器性能和供貨范圍滿足合同描述，由雙方代表簽訂驗收報告。如果驗收過程由于買方原因延誤，所有余款將在買方接到安裝通知30天內付清。安裝之前，買方必須按照賣方提供的安裝條件要求準備好安裝條件。安裝調試，培訓和驗收時間總計不超過三天。

Additional analytical help or training can be quoted if required. The commissioning is completed with an acceptance test, which shall demonstrate the perfect operation of the analytical system. Upon fulfillment of the Spectro specifications of the quoted analytical instrument, the acceptance certificate has to be issued and signed by both parties. In the event of the commissioning being delayed for reasons caused by the purchaser, it is agreed that related payments are payable within 30 days after notification that the goods are ready for installation. Prior to commissioning, the installation requirements for the quoted analytical instrument must be fulfilled by the purchaser. Total time for Installation, training and commissioning is not more than three days.

 

根據布魯塞爾海關條約，儀器的海關稅號為90.27.30.00

For this type of instrument Customs Tariff No. 90.27.30.00 has to be applied according to the Brussels Customs Tariff Scheme.

 

除非特別說明，本報價涵蓋所有供貨范圍原產地為聯邦德國。

Except where otherwise stated, country of origin of the items quoted in this offer is the Federal Republic of Germany.

 

如果對于技術進步有利，我公司保留隨時對設備進行技術改進的權利。我公司將根據庫存標樣的情況對儀器工作曲線范圍進行調整。

We reserve the right to change the technical specifications at any time if necessary for technical progress, or to modify the calibration ranges depending on the availability of standard reference materials.

  

報價有效期獲得德國政府出口授權批準。報價有效期為3個月。

The validity of this quotation is subject to German Government Export Authority approval. Furthermore it is subject to clarification if an export license is necessary and/or has to be issued. This quotation is valid for 3 months.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The instrument is calibrated with limited international standard which Spectro Analytical Instruments GmbH have for general purpose. For special alloy and special elements, the instrument must be calibrated by customer themselves.

以下工作曲線由德國斯派克分析儀器公司用國際標準樣品進行繪制（通道線性范圍大于以下工作曲線范圍）。對于用戶提出的特殊合金、元素及分析范圍，將由用戶提供標樣，斯派克公司免費繪制。

 

 

 

 

 

Optic 

光學系統

Spark stand

火花臺

Spark source

火花光源

Spectrometer control

光譜儀控制系統

Readout system

數據讀出系統

SparkAnalyzer™ software

SparkAnalyzer™ 分析軟件

DIA software

DIA 數據管理軟件

 

 

High resolution Multi detectors

多個高分辨率檢測器

Stabilized against fluctuations in temperature

抗溫度波動穩定結構

Drift free due to the material used

采用不產生飄移材料

Automated profiling

自動描跡

 

靈活選擇分析模式

Optimized to customer requirements

根據用戶具體分析要求進行優化

Easily, on site addition of additional modules

方便在用戶現場增加分析模式

 

Open spark stand for high sample throughput

開放式火花臺，快速樣品切換

Analysis of samples with various kinds of geometrics

適于分析各種幾何形狀的樣品

Optimized Argon flow

氬氣流優化

Minimized Argon consumption ( Argon Saver Module)

最小氬氣消耗設計（氬氣節約模式）

Reduced cleaning intervals

減少清理次數

Table plate easily exchangeable

易于更換的火花臺板

Temperature absorbent design, water cooling not required

熱量吸收裝置設計，無需水冷

Integrated shutter system for optimum plasma viewing

集成快門系統，實現最佳等離子觀測角度切換

 

全數字等離子發生器。數字放電參數設定，數字脈沖發生器，數字離線脈沖控制。

Fully digitalized plasma generator with digital discharge definition, digital pulse generation and digital offline pulse control

32 MHz 微處理器控制

32 MHz micro-controller

數據讀出率：200微秒放電400次

Sampling rate:  400 in 200ms-discharge

能量分辨率：125 毫瓦

Energy resolution: 125 mW

最長單次火花放電時間：4000 微秒

Max. spark duration:  4000ms

最大火花功率：4 千瓦

Max. spark power 4 KW

 

High Speed 12 Bit ADC

高速 12位AD 轉換

DSP-Controller with 66 MHz

66 MHz DSP 控制器

Serial Source-Interface

光源配有串行接口

 

External computer system 

外接控制用計算機系統

Operating system Windows™

Windows™ 操作系統

Keyboard and mouse

鍵盤和鼠標

TFT LCD Display

液晶顯示屏

Printer

打印機

 

 

 

 

ICAL – Intelligent Calibration Logic (only one sample for standadization)

ICAL-智能邏輯校正(標準化只需一個標樣)

Function keys for routine operation

日常操作的功能鍵

User friendly system surface under Windows™

用戶友好操作界面的Windows™ 軟件

Output of results in various concentrations and intensity mode

分析結果采用濃度和強度多種顯示模式

Concentration unit selectable (%, ppm)

%, ppm濃度顯示單位可選

Output of statistical data (e.g. average of up to 50 single sparks, rel. standard deviation)

統計結果輸出(多至50次激發結果的平均值及相對標準偏差等的計算)

Average calculation manual set with the possibility to switch back to single sparks

手動平均值的計算, 且可回到單次火花分析結果

Common output for gliding average and single sparks on screen

平均值和單次火花值的屏顯

Fonts, font-size, count of single sparks, etc. are freely configurable

顯示字體, 字體大小, 單次火花計數等可靈活設置

Automatic switch over of spectral lines according to their concentration ranges

根據元素的濃度自動選擇分析譜線

Additive and multiplikative interelement correction

加合和多重內標元素校正

Matrix correction

基體校正

Calculation of concentration proportions using calibration polynome

采用多項式校正方法計算濃度比例

Material (quality) specific Type recalibration

材料(牌號)類型再校正

Automatic program selection

自動程序選擇

Possibility for automatic request for recalibration or control samples depending on time or sparks

可根據時間或火花數自動要求測定再校正或控樣

Flagging of results beyond calibration range

標記超出工作曲線濃度范圍的分析結果

Input of user-defined sample identity codes

用戶自定義樣品識別代碼的輸入

Automatic and/or user controlled printout of analytical results and statistical data

自動或手動分析和統計結果的打印輸出

Automatic and/or user controlled storage of analytical results and statistical data

自動或手動分析和統計結果的存貯

Transmission of results to remote printers and/or terminals

遠程打印機和/或終端的結果傳輸

Transmission of results via TCP/IP

通過TCP/IP協議進行數據傳輸

Free editable quality data base

靈活編輯數據庫

Quality check function

牌號核對功能

Quality identification function

牌號鑒定功能

Input and calculation of user defined formulas

按照用戶自定義的公式輸入并進行計算

Multiple language support (pre-configured languages are GER, ENG)

支持多語種(儀器預置為英文和德文)

Software controlled Argon-Saver

軟件控制節省氬氣

Automatic hardware error diagnostic

硬件錯誤自診斷

32bit application

32位應用軟件

 

 

Manual or automatic selection of polynomial order of curve fit

手動或自動選擇多項式曲線擬合

Calculation of spectral interferences and interelement corrections

自動或手動進行譜線和共存元素校正

Graphic display of calibration curves with zoom function and calculated correction factors

校正曲線的圖象顯示, 可進行縮義和校正系數計算

Identification of calibration standards by group

分組校正標樣的

Standards library

標樣庫

 

 

Powerful data management supporting test characters, formats, dimensions and reports etc.

強大的數據管理功能, 支持特定字符, 格式, 數據元和報告

 

 

32bit application

32位應用程序

Fonts, font-sized (depending on Windows setup)

字體, 字體大小(基于Windows軟件的的設置)

any Screen resolution

適合任意分辨率的屏幕

Various date/time formats (depending on Windows setup)

各種日期/時間格式(基于Windows軟件的的設置)

Various icons for quick access to output functions or dialogues

多種輸出功能或對話操作的快捷圖標

Drop lists for File, Filter, View

下拉菜單式操作文檔, 篩選和察看

Unlimited number of elements

不限制元素數量

Unlimited number of sample id fields

不限制樣品識別域的數量

Help as HTML file

HTML 文件幫助格式

Manual as MS-Word file or PDF (Acrobat Reader)

手動轉換為MS-Word 或PDF(Acrobat Reader)

Language switch (pre-configured languages are GER, ENG)

語種轉換(預設語種為英文和德文)

Database:

數據庫:

Borland Database Engine

Borland 數據庫引擎

Archive function, database manager

存檔功能, 數據庫管理

Communication & Instrument interfacing, Import, Export:

儀器和通信間的接口, 輸入和輸出

File Interface to Spectro instruments

Spectro 主機和文檔接口

Instrument code table

儀器代碼表

Instrument manager for one Spectro instrument with file interface

一個帶有文檔接口的Spectro主機管理器

DDE export (spreadsheet & word processor, requires these software packages)

動態數據交換(需自備電子制表軟件或文字處理軟件)

DDE command line editor

動態編輯數據命令行

Export to Spectro 4.3 file

Spectro 4.3 文檔輸出

Documentation:

文件 :

Standard print routine

標準日常輸出

Print on standard/default windows printer

標準/默認windows打印輸出

Printer selection in print dialogue

對話式選擇打印機

Print Preview

打印預覽

Sort for printing

分類打印

Printer setup

打印設置

Analyses management:

分析管理:

Archive function, database manager

存檔功能, 數據庫管理器

Spreadsheet-like analyses table

電子制表軟件-如分析結果列表

Unlimited number of views for analyses table

不限制察看分析結果列表的數目

Search function for all data fields in view

所有數據域的查找功能

Edit function for analyses

分析的編輯功能

Audit Trail function

索引功能

Click’n’mark analyses selection

挑選分析結果時發出”嘀嘀”聲

Display formats with elements, dimensions, decimals

元素, 大小, 小數點的顯示格式

Analysis copy function

分析結果復制功能

Units & dimensions (unlimited number)

結果單位和小數點選擇(不限數目)

Manual analysis input

手動分析結果輸入

Transparent access thru all sample-ids & element fields

所有樣品識別和元素域的操作一目了然

Applicable for all analyses views and outputs

適用于所有分析結果的查找和輸出

Quality database

牌號數據庫

Quality control function

牌號控制功能

Quality identification

牌號識別功能

Display of quality control in the analyses table

分析結果列表中牌號控制的顯示

Automatic check of received qualities for existence

接收到的已存在牌號的自動檢測

Formula editor with extended possibilities

擴展公式編輯功能

Formula calculation

自定義公式編輯

Numeric statistics (no., sum, average, abs./rel std dev., min, max, range)

數字統計功能(序號, 加合, 平均, 絕對/相對 標準偏差, 最大, 最小, 范圍)

Macro programs, with asynchronous execution

異步宏編輯

Macro sequences, with asynchronous execution

異步宏排序

Job server for automatic event, or scheduled macro execution

自動項目或預定宏執行的任務服務器

 

730 x 615 x 480 mm (D x W x H)

長x寬x高(730 x 615 x 480mm)

 

凈重約 70kg  (不包括附件)

 

230 V  + 10 % / - 10 %, 50 Hz

max. 400VA during spark mode

在激發時, 最大400VA

16 A slow-blow fuse

16A 慢熔保險絲

 

+10°C - +30°C

 

20 – 80%

 

7 bar 

 

5.0 (99.999% Ar)

 

待機Stand-by      6 l/h   

 

常流量Constant flow   23 l/h

 

分析流量Analytical flow     200 l/h

 

 

 

合同總價包括安裝調試，安裝現場培訓，設備移交用戶。

The total price includes installation, commissioning of the analytical instrument and a basic training of its operation.

設備移交以設備驗收為終結。驗收展示分析系統的完美運行，儀器性能和供貨范圍滿足合同描述，由雙方代表簽訂驗收報告。安裝之前，買方必須按照賣方提供的安裝條件要求準備好安裝條件。安裝調試，培訓和驗收時間總計不超過三天。額外的應用支持和培訓需要收費。如果不是賣方的問題，賣方只提供一次免費的上門安裝調試及培訓服務。

Additional analytical help or training can be quoted if required. The commissioning is completed with an acceptance test, which shall demonstrate the perfect operation of the analytical system. Upon fulfillment of the Spectro specifications of the quoted analytical instrument, the acceptance certificate has to be issued and signed by both parties. Prior to commissioning, the installation requirements for the quoted analytical instrument must be fulfilled by the purchaser. Total time for Installation, training and commissioning is not more than three days.

 

 

保修期為驗收后12個月或從德國發票日期之日起18個月，以先到者為準。除因用戶使用不當造成的損壞以外，保修期內，德國斯派克分析儀器公司負責為用戶免費維修或更換相應損壞部件。

The warranty period is 12 months after acceptance or 18 month from invoice date, whatever occurs first. All faulty components will be repaired or replaced free of charge, except for damages caused by customer's negligence.

供方負責終身維修。保修期外，供方應繼續向用戶提供優質服務。

The Seller should always provide the buyer with good service after warranty.

供方設有備件保稅倉庫，保證備件供應。

The Seller must supply the spare parts to the buyer in time.

 

 

用再校準標樣進行技術驗收。

The international standard samples will be selected during acceptance.

 

按合同規定的供貨范圍進行清點驗收。

The quantity will be checked according to the supply scope of the contract.

  

 

根據布魯塞爾海關條約，儀器的海關稅號為90.27.30.00

For this type of instrument Customs Tariff No. 90.27.30.00 has to be applied according to the Brussels Customs Tariff Scheme.

 

 

除非特別說明，本報價涵蓋所有供貨范圍原產地為聯邦德國。

Except where otherwise stated, country of origin of the items quoted in this offer is the Federal Republic of Germany.