国产三线在线,亚洲久草在线视频,9久re热视频在线精品,久久久xxx

高耐磨TPEE美國杜邦5555HS
高耐磨TPEE美國杜邦5555HS
產品價格:¥40(人民幣)
  • 規格:5555HS
  • 發貨地:廣東東莞市
  • 品牌:
  • 最小起訂量:1千克
  • 誠信商家
    會員級別:鉆石會員
    認證類型:企業認證
    企業證件:通過認證

    商鋪名稱:東莞市華韻塑膠原料有限公司

    聯系人:郭琳(小姐)

    聯系手機:

    固定電話:

    企業郵箱:934235608@qq.com

    聯系地址:東莞市樟木頭鎮奧園塑金國際16棟110室

    郵編:523639

    聯系我時,請說是在線纜網上看到的,謝謝!

    商品詳情

      高耐磨TPEE美國杜邦5555HS

      熱性能

      TPEE具有優異的耐熱性能,硬度越高,耐熱性越好;TPEE110~140℃連續加熱10h基本不失重,在160℃和180℃分別加熱10h,失重僅為0.05%0.1%,因而TPEE的使用溫度非常高,短期使用溫度更高,能適應汽車生產線上的烘漆溫度(150~160),并且它在高低溫下機械性能損失小。TPEE120℃以上使用,其拉伸強度遠遠高于TPU此外TPEE還具有出色的耐低溫性能,TPEE脆點低于-70℃并且硬度越低,耐寒性越好,大部分TPEE可在-40℃下長期使用。由于TPEE在高、低溫時表現出的均衡性能,它的工作溫度范圍非常寬,可在-70~200℃使用。

      TPEE  5555HS  美國杜邦公司 物性數據
      ①原料描述部分
       暫無此原料描述部分

      ②原料技術數據
      性能項目 試驗條件[狀態] 測試方法 測試數據 數據單位
      基本性能 24小時吸水率 --- ASTM D-570 0.7 %
      物理性能 泰伯磨耗量 CS-17輪 ASTM D-1044 - mg/1000rev
      比重 --- ASTM D-792 1.20 ---
      熔體流動速率 --- ASTM D-1238 8.5 g/10min
      熱畸變溫度 @0.5Mpa ASTM D-648 90
      泰伯磨耗量 H 18輪 ASTM D-1044 112 mg/1000rev
      機械性能 硬度計硬度 --- ASTM D-2240 55 ---
      揉曲模量 23℃ ASTM D-790 207 Mpa
      斷裂拉伸力 --- ASTM D-638 40 Mpa
      斷裂伸長 --- ASTM D-638 500 %
      拉伸力 5%伸長
      10%伸長
      ---
      ASTM D-638
      ASTM D-638
      6.9
      10.3
      Mpa
      Mpa
      埃佐沖擊強度 23℃ ASTM D-256 不破裂 J/m
      初耐撕裂性能 --- ASTM D-1004 158 kn/m
      熱 性 能 維卡軟化點 --- ASTM D-1525 180
      熔點 --- ASTM D-3418 203
      熱畸變溫度 @0.18Mpa ASTM D-648 49
      其它性能 耐揉曲切口增長性能 --- ASTM D-1052 >1×105 ---  



      Chemical Medium Resistance TPEE has oil resistance, at room temperature can withstand most polar liquid chemical medium (such as acid, Alkali, amine diol compounds) , but the halogenated hydrocarbons (except Freon) and the role of phenols is powerless, its chemical resistance increases with the increase of its hardness. The permeability of TPEE is only 1/3 ~ 1/300 of that of chloroprene rubber, chlorosulfonated polymer and rubber, but the thermal water resistance of TPEE is poor, the hydrolysis resistance can be improved obviously by adding polycarboimide stabilizer. Aging Resistance TPEE has excellent chemical stability under many different conditions, such as water fog, ozone, outdoor atmospheric aging and so on. As with most sexual bodies, UV degradation occurs, so UV protection AIDS, including carbon black and a variety of pigments or other materials, should be added to the formulation for outdoor applications or products exposed to sunlight; In addition, TPEE also has different degrees of hydrolysis. Application of TPEE products: TPEE is mainly used in areas requiring shock absorption, impact resistance, flex resistance, sealability and performance, oil resistance, chemical resistance, and adequate strength. Such as: Polymer Modification, automobile parts, high and low temperature resistant wire sheath, hydraulic hose, shoe material, transmission belt, rotary molded tire, flexible joint, muffler gear, elevator slide, chemical equipment pipeline valve anti-corrosion wear-resistant materials such as high and low temperature.

    在線詢盤/留言
  • 0571-87774297  
    主站蜘蛛池模板: 瑞金市| 保德县| 闽侯县| 噶尔县| 庆安县| 海安县| 金沙县| 大渡口区| 壶关县| 乃东县| 巴彦淖尔市| 仙桃市| 林州市| 许昌市| 油尖旺区| 楚雄市| 安图县| 南靖县| 夏河县| 邛崃市| 简阳市| 徐水县| 兴安县| 冷水江市| 潜山县| 荔浦县| 绥化市| 抚宁县| 同江市| 银川市| 奈曼旗| 临武县| 南宫市| 若羌县| 彭泽县| 临武县| 南漳县| 错那县| 拜泉县| 柳江县| 老河口市|