一区二区三区四区视频,日本不卡的三区四区五区,亚洲va久久

商品詳情

本產品按GB12706《額定電壓35kV及以下銅芯、鋁芯塑料絕緣電力電纜》和GB12666《電線電纜燃燒實驗方法》標準生產，同時還可根據用戶需要按國際電工委員會推薦的IEC標準、英國BS標準、德國DIN標準、美國ICEA標準及日本JIS標準生產。
The product is manufactured according to the standard of GB12706 and GB12666 or IEC,BS,DIN,ICEA,and JIS upon request.
適用范圍
本產品適用于工頻額定電壓0.6/1kV及以下配電線路或工業裝置中有耐火要求的固定敷設場所使用。
The product is suitable for use in power distribution lines or fixed installations with rated power-frequency voltage up to and including 0.6/1kV.

使用特性
·工頻額定電壓U0/U:0.6/1kV。
Rated power-frequency voltage U0/U:0.6/1kV.
·電纜導體的最高允許長期工作溫度（PVC/XLPE）:70℃/90℃.
Max.permissible continuous operating temperature of conductor (PVC/XLPE): 70℃/90℃
·短路時（最長持續時間不超過5s）電纜導體最高允許溫度
PVC:導體截面≤300mm²-160℃
導體截面＞300mm²-140℃
XLPE:250℃
Max.short-circuit temperature of the conductor shall not exceed(5s maxiumduration):
PVC:cross-section of conductor≤300mm²-160℃
cross-section of conductor＞300mm²-140℃
XLPE:250℃
·電纜敷設時環境溫度應不低于0℃
The ambient temperature under installation should not below 0℃
·電纜的彎曲半徑：多芯電纜不小于電纜外徑15倍，單芯電纜不小于電纜外徑20倍。
The bending radius of a single-core cable should not less than 20 times of the cable diameter.
The bending radius of multicore-cable should not less than 15 times of the cable diameter.

電纜的型號Type of cable

　

　

結構尺寸及主要技術參數Construction and main technical data
·0.6/1kV單芯耐火電力電纜（NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV）
0.6/1kV Single-core Fire Resistance Power Cable

　

注：*表示導體為緊壓圓形線芯。
Where：*=Compact circular stranded conductor.

本產品按GB12706《額定電壓35kV及以下銅芯、鋁芯塑料絕緣電力電纜》和GB12666《電線電纜燃燒實驗方法》標準生產，同時還可根據用戶需要按國際電工委員會推薦的IEC標準、英國BS標準、德國DIN標準、美國ICEA標準及日本JIS標準生產。
The product is manufactured according to the standard of GB12706 and GB12666 or IEC,BS,DIN,ICEA,and JIS upon request.
適用范圍
本產品適用于工頻額定電壓0.6/1kV及以下配電線路或工業裝置中有耐火要求的固定敷設場所使用。
The product is suitable for use in power distribution lines or fixed installations with rated power-frequency voltage up to and including 0.6/1kV.

使用特性
·工頻額定電壓U0/U:0.6/1kV。
Rated power-frequency voltage U0/U:0.6/1kV.
·電纜導體的最高允許長期工作溫度（PVC/XLPE）:70℃/90℃.
Max.permissible continuous operating temperature of conductor (PVC/XLPE): 70℃/90℃
·短路時（最長持續時間不超過5s）電纜導體最高允許溫度
PVC:導體截面≤300mm²-160℃
導體截面＞300mm²-140℃
XLPE:250℃
Max.short-circuit temperature of the conductor shall not exceed(5s maxiumduration):
PVC:cross-section of conductor≤300mm²-160℃
cross-section of conductor＞300mm²-140℃
XLPE:250℃
·電纜敷設時環境溫度應不低于0℃
The ambient temperature under installation should not below 0℃
·電纜的彎曲半徑：多芯電纜不小于電纜外徑15倍，單芯電纜不小于電纜外徑20倍。
The bending radius of a single-core cable should not less than 20 times of the cable diameter.
The bending radius of multicore-cable should not less than 15 times of the cable diameter.

電纜的型號Type of cable

　

　

結構尺寸及主要技術參數Construction and main technical data
·0.6/1kV單芯耐火電力電纜（NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV）
0.6/1kV Single-core Fire Resistance Power Cable

　

注：*表示導體為緊壓圓形線芯。
Where：*=Compact circular stranded conductor.

本產品按GB12706《額定電壓35kV及以下銅芯、鋁芯塑料絕緣電力電纜》和GB12666《電線電纜燃燒實驗方法》標準生產，同時還可根據用戶需要按國際電工委員會推薦的IEC標準、英國BS標準、德國DIN標準、美國ICEA標準及日本JIS標準生產。
The product is manufactured according to the standard of GB12706 and GB12666 or IEC,BS,DIN,ICEA,and JIS upon request.
適用范圍
本產品適用于工頻額定電壓0.6/1kV及以下配電線路或工業裝置中有耐火要求的固定敷設場所使用。
The product is suitable for use in power distribution lines or fixed installations with rated power-frequency voltage up to and including 0.6/1kV.

使用特性
·工頻額定電壓U0/U:0.6/1kV。
Rated power-frequency voltage U0/U:0.6/1kV.
·電纜導體的最高允許長期工作溫度（PVC/XLPE）:70℃/90℃.
Max.permissible continuous operating temperature of conductor (PVC/XLPE): 70℃/90℃
·短路時（最長持續時間不超過5s）電纜導體最高允許溫度
PVC:導體截面≤300mm²-160℃
導體截面＞300mm²-140℃
XLPE:250℃
Max.short-circuit temperature of the conductor shall not exceed(5s maxiumduration):
PVC:cross-section of conductor≤300mm²-160℃
cross-section of conductor＞300mm²-140℃
XLPE:250℃
·電纜敷設時環境溫度應不低于0℃
The ambient temperature under installation should not below 0℃
·電纜的彎曲半徑：多芯電纜不小于電纜外徑15倍，單芯電纜不小于電纜外徑20倍。
The bending radius of a single-core cable should not less than 20 times of the cable diameter.
The bending radius of multicore-cable should not less than 15 times of the cable diameter.

電纜的型號Type of cable

　

　

結構尺寸及主要技術參數Construction and main technical data
·0.6/1kV單芯耐火電力電纜（NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV）
0.6/1kV Single-core Fire Resistance Power Cable

　

注：*表示導體為緊壓圓形線芯。
Where：*=Compact circular stranded conductor.

·0.6/1kV二芯耐火電力電纜（NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV）
0.6/1kV 2-core Fire Resistance Power Cable

　

注：*表示導體為緊壓圓形線芯。
Where：*=Compact circular stranded conductor.

·0.6/1kV三芯耐火電力電纜（NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV）
0.6/1kV 3-core Fire Resistance Power Cable

　

注：*表示導體為緊壓圓形線芯。
Where：*=Compact circular stranded conductor.

·0.6/1kV四芯耐火電力電纜（NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV）
0.6/1kV 4-core Fire Resistance Power Cable

　

注：*表示導體為緊壓圓形線芯。
Where：*=Compact circular stranded conductor.

·0.6/1kV五芯耐火電力電纜（NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV）
0.6/kV 5-core Fire Resistance Power Cable

　

注：*表示導體為緊壓圓形線芯。
Where：*=Compact circular stranded conductor.

·0.6/1kV、3+1芯耐火電力電纜（NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV）
0.6/1kV 3+1-core Fire Resistance Power Cable

　

注：*表示導體為緊壓圓形線芯。
Where：*=Compact circular stranded conductor.

·0.6/1kV、3+1芯耐火電力電纜（NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV）
0.6/1kV 3+1-core Fire Resistance Power Cable

　

注：*表示導體為緊壓圓形線芯。
Where：*=Compact circular stranded conductor.

·0.6/1kV、3+2芯耐火電力電纜（NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV）
0.6/1kV 3+2-core Fire Resistance Power Cable

　

注：*表示導體為緊壓圓形線芯。
Where：*=Compact circular stranded conductor.

·0.6/1kV、3+2芯耐火電力電纜（NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV）
0.6/1kV3+2-core Fire Resistance Power Cable

注：*表示導體為緊壓圓形線芯。
Where：*=Compact circular stranded conductor.

·0.6/1kV、4+1芯耐火電力電纜（NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV）
0.6/1kV4+1-core Fire Resistance Power Cable

　

注：*表示導體為緊壓圓形線芯。
Where：*=Compact circular stranded conductor.

·0.6/1kV、4+1芯耐火電力電纜（NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV）
0.6/1kV4+1-core Fire Resistance Power Cable

　

注：*表示導體為緊壓圓形線芯。
Where：*=Compact circular stranded conductor.

·0.6/1kV、單芯鋼帶鎧裝耐火電力電纜（NH(B)-VV22、NHA-VV22、NH(B)-YJV22 、 NHA-YJV22）
0.6/1kV Single-core Steel Tape Armoured Fire Resistance Power Cable

　

注：*表示導體為緊壓圓形線芯。
Where：*=Compact circular stranded conductor.

·0.6/1kV、二芯鋼帶鎧裝耐火電力電纜（NH(B)-VV22、NHA-VV22、NH(B)-YJV22 、 NHA-YJV22）
0.6/1kV 2-core Steel Tape Armoured Fire Resistance Power Cable

　

注：*表示導體為緊壓圓形線芯。
Where：*=Compact circular stranded conductor.

·0.6/1kV、三芯鋼帶鎧裝耐火電力電纜（NH(B)-VV22、NHA-VV22、NH(B)-YJV22 、 NHA-YJV22）
0.6/1kV 3-Core Steel Tape Armoured Fire Resistance Power Cable

　

注：*表示導體為緊壓圓形線芯。
Where：*=Compact circular stranded conductor.

·0.6/1kV、四芯鋼帶鎧裝耐火電力電纜（NH(B)-VV22、NHA-VV22、NH(B)-YJV22 、 NHA-YJV22）
0.6/1kV 4-Core Steel Tape Armoured Fire Resistance Power Cable

　

注：*表示導體為緊壓圓形線芯。
Where：*=Compact circular stranded conductor.

·0.6/1kV、五芯鋼帶鎧裝耐火電力電纜（NH(B)-VV22、NHA-VV22、NH(B)-YJV22 、 NHA-YJV22）
0.6/1kV 5-Core Steel Tape Armoured Fire Resistance Power Cable

　

注：*表示導體為緊壓圓形線芯。
Where：*=Compact circular stranded conductor.

·0.6/1kV、3+1芯鋼帶鎧裝耐火電力電纜（NH(B)-VV22、NHA-VV22、NH(B)-YJV22 、 NHA-YJV22）
0.6/1kV 3+1-Core Steel Tape Armoured Fire Resistance Power Cable

　

注：*表示導體為緊壓圓形線芯。
Where：*=Compact circular stranded conductor.

·0.6/1kV、3+1芯鋼帶鎧裝耐火電力電纜（NH(B)-VV22、NHA-VV22、NH(B)-YJV22 、 NHA-YJV22）
0.6/1kV 3+1-Core Steel Tape Armoured Fire Resistance Power Cable

　

注：*表示導體為緊壓圓形線芯。
Where：*=Compact circular stranded conductor.

·0.6/1kV、3+2芯鋼帶鎧裝耐火電力電纜（NH(B)-VV22、NHA-VV22、NH(B)-YJV22 、 NHA-YJV22）
0.6/1kV 3+2-Core Steel Tape Armoured Fire Resistance Power Cable

　

注：*表示導體為緊壓圓形線芯。
Where：*=Compact circular stranded conductor.

·0.6/1kV、3+2芯鋼帶鎧裝耐火電力電纜（NH(B)-VV22、NHA-VV22、NH(B)-YJV22 、 NHA-YJV22）
0.6/1kV 3+2-Core Steel Tape Armoured Fire Resistance Power Cable

　

注：*表示導體為緊壓圓形線芯。
Where：*=Compact circular stranded conductor.

本產品按GB12706《額定電壓35kV及以下銅芯、鋁芯塑料絕緣電力電纜》和GB12666《電線電纜燃燒實驗方法》標準生產，同時還可根據用戶需要按國際電工委員會推薦的IEC標準、英國BS標準、德國DIN標準、美國ICEA標準及日本JIS標準生產。
The product is manufactured according to the standard of GB12706 and GB12666 or IEC,BS,DIN,ICEA,and JIS upon request.
適用范圍
本產品適用于工頻額定電壓0.6/1kV及以下配電線路或工業裝置中有耐火要求的固定敷設場所使用。
The product is suitable for use in power distribution lines or fixed installations with rated power-frequency voltage up to and including 0.6/1kV.

使用特性
·工頻額定電壓U0/U:0.6/1kV。
Rated power-frequency voltage U0/U:0.6/1kV.
·電纜導體的最高允許長期工作溫度（PVC/XLPE）:70℃/90℃.
Max.permissible continuous operating temperature of conductor (PVC/XLPE): 70℃/90℃
·短路時（最長持續時間不超過5s）電纜導體最高允許溫度
PVC:導體截面≤300mm²-160℃
導體截面＞300mm²-140℃
XLPE:250℃
Max.short-circuit temperature of the conductor shall not exceed(5s maxiumduration):
PVC:cross-section of conductor≤300mm²-160℃
cross-section of conductor＞300mm²-140℃
XLPE:250℃
·電纜敷設時環境溫度應不低于0℃
The ambient temperature under installation should not below 0℃
·電纜的彎曲半徑：多芯電纜不小于電纜外徑15倍，單芯電纜不小于電纜外徑20倍。
The bending radius of a single-core cable should not less than 20 times of the cable diameter.
The bending radius of multicore-cable should not less than 15 times of the cable diameter.

電纜的型號Type of cable

　

　

結構尺寸及主要技術參數Construction and main technical data
·0.6/1kV單芯耐火電力電纜（NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV）
0.6/1kV Single-core Fire Resistance Power Cable

　

注：*表示導體為緊壓圓形線芯。
Where：*=Compact circular stranded conductor.

·0.6/1kV二芯耐火電力電纜（NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV）
0.6/1kV 2-core Fire Resistance Power Cable

　

注：*表示導體為緊壓圓形線芯。
Where：*=Compact circular stranded conductor.

·0.6/1kV三芯耐火電力電纜（NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV）
0.6/1kV 3-core Fire Resistance Power Cable

　

注：*表示導體為緊壓圓形線芯。
Where：*=Compact circular stranded conductor.

·0.6/1kV四芯耐火電力電纜（NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV）
0.6/1kV 4-core Fire Resistance Power Cable

　

注：*表示導體為緊壓圓形線芯。
Where：*=Compact circular stranded conductor.

·0.6/1kV五芯耐火電力電纜（NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV）
0.6/kV 5-core Fire Resistance Power Cable

　

注：*表示導體為緊壓圓形線芯。
Where：*=Compact circular stranded conductor.

·0.6/1kV、3+1芯耐火電力電纜（NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV）
0.6/1kV 3+1-core Fire Resistance Power Cable

　

注：*表示導體為緊壓圓形線芯。
Where：*=Compact circular stranded conductor.

·0.6/1kV、3+1芯耐火電力電纜（NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV）
0.6/1kV 3+1-core Fire Resistance Power Cable

　

注：*表示導體為緊壓圓形線芯。
Where：*=Compact circular stranded conductor.

·0.6/1kV、3+2芯耐火電力電纜（NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV）
0.6/1kV 3+2-core Fire Resistance Power Cable

　

注：*表示導體為緊壓圓形線芯。
Where：*=Compact circular stranded conductor.

·0.6/1kV、3+2芯耐火電力電纜（NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV）
0.6/1kV3+2-core Fire Resistance Power Cable

注：*表示導體為緊壓圓形線芯。
Where：*=Compact circular stranded conductor.

·0.6/1kV、4+1芯耐火電力電纜（NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV）
0.6/1kV4+1-core Fire Resistance Power Cable

　

注：*表示導體為緊壓圓形線芯。
Where：*=Compact circular stranded conductor.

·0.6/1kV、4+1芯耐火電力電纜（NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV）
0.6/1kV4+1-core Fire Resistance Power Cable

　

注：*表示導體為緊壓圓形線芯。
Where：*=Compact circular stranded conductor.

·0.6/1kV、單芯鋼帶鎧裝耐火電力電纜（NH(B)-VV22、NHA-VV22、NH(B)-YJV22 、 NHA-YJV22）
0.6/1kV Single-core Steel Tape Armoured Fire Resistance Power Cable

　

注：*表示導體為緊壓圓形線芯。
Where：*=Compact circular stranded conductor.

·0.6/1kV、二芯鋼帶鎧裝耐火電力電纜（NH(B)-VV22、NHA-VV22、NH(B)-YJV22 、 NHA-YJV22）
0.6/1kV 2-core Steel Tape Armoured Fire Resistance Power Cable

　

注：*表示導體為緊壓圓形線芯。
Where：*=Compact circular stranded conductor.

·0.6/1kV、三芯鋼帶鎧裝耐火電力電纜（NH(B)-VV22、NHA-VV22、NH(B)-YJV22 、 NHA-YJV22）
0.6/1kV 3-Core Steel Tape Armoured Fire Resistance Power Cable

　

注：*表示導體為緊壓圓形線芯。
Where：*=Compact circular stranded conductor.

·0.6/1kV、四芯鋼帶鎧裝耐火電力電纜（NH(B)-VV22、NHA-VV22、NH(B)-YJV22 、 NHA-YJV22）
0.6/1kV 4-Core Steel Tape Armoured Fire Resistance Power Cable

　

注：*表示導體為緊壓圓形線芯。
Where：*=Compact circular stranded conductor.

·0.6/1kV、五芯鋼帶鎧裝耐火電力電纜（NH(B)-VV22、NHA-VV22、NH(B)-YJV22 、 NHA-YJV22）
0.6/1kV 5-Core Steel Tape Armoured Fire Resistance Power Cable

　

注：*表示導體為緊壓圓形線芯。
Where：*=Compact circular stranded conductor.

·0.6/1kV、3+1芯鋼帶鎧裝耐火電力電纜（NH(B)-VV22、NHA-VV22、NH(B)-YJV22 、 NHA-YJV22）
0.6/1kV 3+1-Core Steel Tape Armoured Fire Resistance Power Cable

　

注：*表示導體為緊壓圓形線芯。
Where：*=Compact circular stranded conductor.

·0.6/1kV、3+1芯鋼帶鎧裝耐火電力電纜（NH(B)-VV22、NHA-VV22、NH(B)-YJV22 、 NHA-YJV22）
0.6/1kV 3+1-Core Steel Tape Armoured Fire Resistance Power Cable

　

注：*表示導體為緊壓圓形線芯。
Where：*=Compact circular stranded conductor.

·0.6/1kV、3+2芯鋼帶鎧裝耐火電力電纜（NH(B)-VV22、NHA-VV22、NH(B)-YJV22 、 NHA-YJV22）
0.6/1kV 3+2-Core Steel Tape Armoured Fire Resistance Power Cable

　

注：*表示導體為緊壓圓形線芯。
Where：*=Compact circular stranded conductor.

·0.6/1kV、3+2芯鋼帶鎧裝耐火電力電纜（NH(B)-VV22、NHA-VV22、NH(B)-YJV22 、 NHA-YJV22）
0.6/1kV 3+2-Core Steel Tape Armoured Fire Resistance Power Cable

　

注：*表示導體為緊壓圓形線芯。
Where：*=Compact circular stranded conductor.

本產品按GB12706《額定電壓35kV及以下銅芯、鋁芯塑料絕緣電力電纜》和GB12666《電線電纜燃燒實驗方法》標準生產，同時還可根據用戶需要按國際電工委員會推薦的IEC標準、英國BS標準、德國DIN標準、美國ICEA標準及日本JIS標準生產。
The product is manufactured according to the standard of GB12706 and GB12666 or IEC,BS,DIN,ICEA,and JIS upon request.
適用范圍
本產品適用于工頻額定電壓0.6/1kV及以下配電線路或工業裝置中有耐火要求的固定敷設場所使用。
The product is suitable for use in power distribution lines or fixed installations with rated power-frequency voltage up to and including 0.6/1kV.

使用特性
·工頻額定電壓U0/U:0.6/1kV。
Rated power-frequency voltage U0/U:0.6/1kV.
·電纜導體的最高允許長期工作溫度（PVC/XLPE）:70℃/90℃.
Max.permissible continuous operating temperature of conductor (PVC/XLPE): 70℃/90℃
·短路時（最長持續時間不超過5s）電纜導體最高允許溫度
PVC:導體截面≤300mm²-160℃
導體截面＞300mm²-140℃
XLPE:250℃
Max.short-circuit temperature of the conductor shall not exceed(5s maxiumduration):
PVC:cross-section of conductor≤300mm²-160℃
cross-section of conductor＞300mm²-140℃
XLPE:250℃
·電纜敷設時環境溫度應不低于0℃
The ambient temperature under installation should not below 0℃
·電纜的彎曲半徑：多芯電纜不小于電纜外徑15倍，單芯電纜不小于電纜外徑20倍。
The bending radius of a single-core cable should not less than 20 times of the cable diameter.
The bending radius of multicore-cable should not less than 15 times of the cable diameter.

電纜的型號Type of cable

　

　

結構尺寸及主要技術參數Construction and main technical data
·0.6/1kV單芯耐火電力電纜（NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV）
0.6/1kV Single-core Fire Resistance Power Cable

　

注：*表示導體為緊壓圓形線芯。
Where：*=Compact circular stranded conductor.

·0.6/1kV二芯耐火電力電纜（NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV）
0.6/1kV 2-core Fire Resistance Power Cable

　

注：*表示導體為緊壓圓形線芯。
Where：*=Compact circular stranded conductor.

·0.6/1kV三芯耐火電力電纜（NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV）
0.6/1kV 3-core Fire Resistance Power Cable

　

注：*表示導體為緊壓圓形線芯。
Where：*=Compact circular stranded conductor.

·0.6/1kV四芯耐火電力電纜（NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV）
0.6/1kV 4-core Fire Resistance Power Cable

　

注：*表示導體為緊壓圓形線芯。
Where：*=Compact circular stranded conductor.

·0.6/1kV五芯耐火電力電纜（NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV）
0.6/kV 5-core Fire Resistance Power Cable

　

注：*表示導體為緊壓圓形線芯。
Where：*=Compact circular stranded conductor.

·0.6/1kV、3+1芯耐火電力電纜（NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV）
0.6/1kV 3+1-core Fire Resistance Power Cable

　

注：*表示導體為緊壓圓形線芯。
Where：*=Compact circular stranded conductor.

·0.6/1kV、3+1芯耐火電力電纜（NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV）
0.6/1kV 3+1-core Fire Resistance Power Cable

　

注：*表示導體為緊壓圓形線芯。
Where：*=Compact circular stranded conductor.

·0.6/1kV、3+2芯耐火電力電纜（NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV）
0.6/1kV 3+2-core Fire Resistance Power Cable

　

注：*表示導體為緊壓圓形線芯。
Where：*=Compact circular stranded conductor.

·0.6/1kV、3+2芯耐火電力電纜（NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV）
0.6/1kV3+2-core Fire Resistance Power Cable

注：*表示導體為緊壓圓形線芯。
Where：*=Compact circular stranded conductor.

·0.6/1kV、4+1芯耐火電力電纜（NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV）
0.6/1kV4+1-core Fire Resistance Power Cable

　

注：*表示導體為緊壓圓形線芯。
Where：*=Compact circular stranded conductor.

·0.6/1kV、4+1芯耐火電力電纜（NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV）
0.6/1kV4+1-core Fire Resistance Power Cable

　

注：*表示導體為緊壓圓形線芯。
Where：*=Compact circular stranded conductor.

·0.6/1kV、單芯鋼帶鎧裝耐火電力電纜（NH(B)-VV22、NHA-VV22、NH(B)-YJV22 、 NHA-YJV22）
0.6/1kV Single-core Steel Tape Armoured Fire Resistance Power Cable

　

注：*表示導體為緊壓圓形線芯。
Where：*=Compact circular stranded conductor.

·0.6/1kV、二芯鋼帶鎧裝耐火電力電纜（NH(B)-VV22、NHA-VV22、NH(B)-YJV22 、 NHA-YJV22）
0.6/1kV 2-core Steel Tape Armoured Fire Resistance Power Cable

　

注：*表示導體為緊壓圓形線芯。
Where：*=Compact circular stranded conductor.

·0.6/1kV、三芯鋼帶鎧裝耐火電力電纜（NH(B)-VV22、NHA-VV22、NH(B)-YJV22 、 NHA-YJV22）
0.6/1kV 3-Core Steel Tape Armoured Fire Resistance Power Cable

　

注：*表示導體為緊壓圓形線芯。
Where：*=Compact circular stranded conductor.

·0.6/1kV、四芯鋼帶鎧裝耐火電力電纜（NH(B)-VV22、NHA-VV22、NH(B)-YJV22 、 NHA-YJV22）
0.6/1kV 4-Core Steel Tape Armoured Fire Resistance Power Cable

　

注：*表示導體為緊壓圓形線芯。
Where：*=Compact circular stranded conductor.

·0.6/1kV、五芯鋼帶鎧裝耐火電力電纜（NH(B)-VV22、NHA-VV22、NH(B)-YJV22 、 NHA-YJV22）
0.6/1kV 5-Core Steel Tape Armoured Fire Resistance Power Cable

　

注：*表示導體為緊壓圓形線芯。
Where：*=Compact circular stranded conductor.

·0.6/1kV、3+1芯鋼帶鎧裝耐火電力電纜（NH(B)-VV22、NHA-VV22、NH(B)-YJV22 、 NHA-YJV22）
0.6/1kV 3+1-Core Steel Tape Armoured Fire Resistance Power Cable

　

注：*表示導體為緊壓圓形線芯。
Where：*=Compact circular stranded conductor.

·0.6/1kV、3+1芯鋼帶鎧裝耐火電力電纜（NH(B)-VV22、NHA-VV22、NH(B)-YJV22 、 NHA-YJV22）
0.6/1kV 3+1-Core Steel Tape Armoured Fire Resistance Power Cable

　

注：*表示導體為緊壓圓形線芯。
Where：*=Compact circular stranded conductor.

·0.6/1kV、3+2芯鋼帶鎧裝耐火電力電纜（NH(B)-VV22、NHA-VV22、NH(B)-YJV22 、 NHA-YJV22）
0.6/1kV 3+2-Core Steel Tape Armoured Fire Resistance Power Cable

　

注：*表示導體為緊壓圓形線芯。
Where：*=Compact circular stranded conductor.

·0.6/1kV、3+2芯鋼帶鎧裝耐火電力電纜（NH(B)-VV22、NHA-VV22、NH(B)-YJV22 、 NHA-YJV22）
0.6/1kV 3+2-Core Steel Tape Armoured Fire Resistance Power Cable

　

注：*表示導體為緊壓圓形線芯。
Where：*=Compact circular stranded conductor.

本產品按GB12706《額定電壓35kV及以下銅芯、鋁芯塑料絕緣電力電纜》和GB12666《電線電纜燃燒實驗方法》標準生產，同時還可根據用戶需要按國際電工委員會推薦的IEC標準、英國BS標準、德國DIN標準、美國ICEA標準及日本JIS標準生產。
The product is manufactured according to the standard of GB12706 and GB12666 or IEC,BS,DIN,ICEA,and JIS upon request.
適用范圍
本產品適用于工頻額定電壓0.6/1kV及以下配電線路或工業裝置中有耐火要求的固定敷設場所使用。
The product is suitable for use in power distribution lines or fixed installations with rated power-frequency voltage up to and including 0.6/1kV.

使用特性
·工頻額定電壓U0/U:0.6/1kV。
Rated power-frequency voltage U0/U:0.6/1kV.
·電纜導體的最高允許長期工作溫度（PVC/XLPE）:70℃/90℃.
Max.permissible continuous operating temperature of conductor (PVC/XLPE): 70℃/90℃
·短路時（最長持續時間不超過5s）電纜導體最高允許溫度
PVC:導體截面≤300mm²-160℃
導體截面＞300mm²-140℃
XLPE:250℃
Max.short-circuit temperature of the conductor shall not exceed(5s maxiumduration):
PVC:cross-section of conductor≤300mm²-160℃
cross-section of conductor＞300mm²-140℃
XLPE:250℃
·電纜敷設時環境溫度應不低于0℃
The ambient temperature under installation should not below 0℃
·電纜的彎曲半徑：多芯電纜不小于電纜外徑15倍，單芯電纜不小于電纜外徑20倍。
The bending radius of a single-core cable should not less than 20 times of the cable diameter.
The bending radius of multicore-cable should not less than 15 times of the cable diameter.

電纜的型號Type of cable

　

　

結構尺寸及主要技術參數Construction and main technical data
·0.6/1kV單芯耐火電力電纜（NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV）
0.6/1kV Single-core Fire Resistance Power Cable

　

注：*表示導體為緊壓圓形線芯。
Where：*=Compact circular stranded conductor.

·0.6/1kV二芯耐火電力電纜（NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV）
0.6/1kV 2-core Fire Resistance Power Cable

　

注：*表示導體為緊壓圓形線芯。
Where：*=Compact circular stranded conductor.

·0.6/1kV三芯耐火電力電纜（NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV）
0.6/1kV 3-core Fire Resistance Power Cable

　

注：*表示導體為緊壓圓形線芯。
Where：*=Compact circular stranded conductor.

·0.6/1kV四芯耐火電力電纜（NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV）
0.6/1kV 4-core Fire Resistance Power Cable

　

注：*表示導體為緊壓圓形線芯。
Where：*=Compact circular stranded conductor.

·0.6/1kV五芯耐火電力電纜（NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV）
0.6/kV 5-core Fire Resistance Power Cable

　

注：*表示導體為緊壓圓形線芯。
Where：*=Compact circular stranded conductor.

·0.6/1kV、3+1芯耐火電力電纜（NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV）
0.6/1kV 3+1-core Fire Resistance Power Cable

　

注：*表示導體為緊壓圓形線芯。
Where：*=Compact circular stranded conductor.

·0.6/1kV、3+1芯耐火電力電纜（NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV）
0.6/1kV 3+1-core Fire Resistance Power Cable

　

注：*表示導體為緊壓圓形線芯。
Where：*=Compact circular stranded conductor.

·0.6/1kV、3+2芯耐火電力電纜（NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV）
0.6/1kV 3+2-core Fire Resistance Power Cable

　

注：*表示導體為緊壓圓形線芯。
Where：*=Compact circular stranded conductor.

·0.6/1kV、3+2芯耐火電力電纜（NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV）
0.6/1kV3+2-core Fire Resistance Power Cable

注：*表示導體為緊壓圓形線芯。
Where：*=Compact circular stranded conductor.

·0.6/1kV、4+1芯耐火電力電纜（NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV）
0.6/1kV4+1-core Fire Resistance Power Cable

　

注：*表示導體為緊壓圓形線芯。
Where：*=Compact circular stranded conductor.

·0.6/1kV、4+1芯耐火電力電纜（NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV）
0.6/1kV4+1-core Fire Resistance Power Cable

　

注：*表示導體為緊壓圓形線芯。
Where：*=Compact circular stranded conductor.

·0.6/1kV、單芯鋼帶鎧裝耐火電力電纜（NH(B)-VV22、NHA-VV22、NH(B)-YJV22 、 NHA-YJV22）
0.6/1kV Single-core Steel Tape Armoured Fire Resistance Power Cable

　

注：*表示導體為緊壓圓形線芯。
Where：*=Compact circular stranded conductor.

·0.6/1kV、二芯鋼帶鎧裝耐火電力電纜（NH(B)-VV22、NHA-VV22、NH(B)-YJV22 、 NHA-YJV22）
0.6/1kV 2-core Steel Tape Armoured Fire Resistance Power Cable

　

注：*表示導體為緊壓圓形線芯。
Where：*=Compact circular stranded conductor.

·0.6/1kV、三芯鋼帶鎧裝耐火電力電纜（NH(B)-VV22、NHA-VV22、NH(B)-YJV22 、 NHA-YJV22）
0.6/1kV 3-Core Steel Tape Armoured Fire Resistance Power Cable

　

注：*表示導體為緊壓圓形線芯。
Where：*=Compact circular stranded conductor.

·0.6/1kV、四芯鋼帶鎧裝耐火電力電纜（NH(B)-VV22、NHA-VV22、NH(B)-YJV22 、 NHA-YJV22）
0.6/1kV 4-Core Steel Tape Armoured Fire Resistance Power Cable

　

注：*表示導體為緊壓圓形線芯。
Where：*=Compact circular stranded conductor.

·0.6/1kV、五芯鋼帶鎧裝耐火電力電纜（NH(B)-VV22、NHA-VV22、NH(B)-YJV22 、 NHA-YJV22）
0.6/1kV 5-Core Steel Tape Armoured Fire Resistance Power Cable

　

注：*表示導體為緊壓圓形線芯。
Where：*=Compact circular stranded conductor.

·0.6/1kV、3+1芯鋼帶鎧裝耐火電力電纜（NH(B)-VV22、NHA-VV22、NH(B)-YJV22 、 NHA-YJV22）
0.6/1kV 3+1-Core Steel Tape Armoured Fire Resistance Power Cable

　

注：*表示導體為緊壓圓形線芯。
Where：*=Compact circular stranded conductor.

·0.6/1kV、3+1芯鋼帶鎧裝耐火電力電纜（NH(B)-VV22、NHA-VV22、NH(B)-YJV22 、 NHA-YJV22）
0.6/1kV 3+1-Core Steel Tape Armoured Fire Resistance Power Cable

　

注：*表示導體為緊壓圓形線芯。
Where：*=Compact circular stranded conductor.

·0.6/1kV、3+2芯鋼帶鎧裝耐火電力電纜（NH(B)-VV22、NHA-VV22、NH(B)-YJV22 、 NHA-YJV22）
0.6/1kV 3+2-Core Steel Tape Armoured Fire Resistance Power Cable

　

注：*表示導體為緊壓圓形線芯。
Where：*=Compact circular stranded conductor.

·0.6/1kV、3+2芯鋼帶鎧裝耐火電力電纜（NH(B)-VV22、NHA-VV22、NH(B)-YJV22 、 NHA-YJV22）
0.6/1kV 3+2-Core Steel Tape Armoured Fire Resistance Power Cable

　

注：*表示導體為緊壓圓形線芯。
Where：*=Compact circular stranded conductor.

本產品按GB12706《額定電壓35kV及以下銅芯、鋁芯塑料絕緣電力電纜》和GB12666《電線電纜燃燒實驗方法》標準生產，同時還可根據用戶需要按國際電工委員會推薦的IEC標準、英國BS標準、德國DIN標準、美國ICEA標準及日本JIS標準生產。
The product is manufactured according to the standard of GB12706 and GB12666 or IEC,BS,DIN,ICEA,and JIS upon request.
適用范圍
本產品適用于工頻額定電壓0.6/1kV及以下配電線路或工業裝置中有耐火要求的固定敷設場所使用。
The product is suitable for use in power distribution lines or fixed installations with rated power-frequency voltage up to and including 0.6/1kV.

使用特性
·工頻額定電壓U0/U:0.6/1kV。
Rated power-frequency voltage U0/U:0.6/1kV.
·電纜導體的最高允許長期工作溫度（PVC/XLPE）:70℃/90℃.
Max.permissible continuous operating temperature of conductor (PVC/XLPE): 70℃/90℃
·短路時（最長持續時間不超過5s）電纜導體最高允許溫度
PVC:導體截面≤300mm²-160℃
導體截面＞300mm²-140℃
XLPE:250℃
Max.short-circuit temperature of the conductor shall not exceed(5s maxiumduration):
PVC:cross-section of conductor≤300mm²-160℃
cross-section of conductor＞300mm²-140℃
XLPE:250℃
·電纜敷設時環境溫度應不低于0℃
The ambient temperature under installation should not below 0℃
·電纜的彎曲半徑：多芯電纜不小于電纜外徑15倍，單芯電纜不小于電纜外徑20倍。
The bending radius of a single-core cable should not less than 20 times of the cable diameter.
The bending radius of multicore-cable should not less than 15 times of the cable diameter.

電纜的型號Type of cable

　

　

結構尺寸及主要技術參數Construction and main technical data
·0.6/1kV單芯耐火電力電纜（NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV）
0.6/1kV Single-core Fire Resistance Power Cable

　

注：*表示導體為緊壓圓形線芯。
Where：*=Compact circular stranded conductor.

本產品按GB12706《額定電壓35kV及以下銅芯、鋁芯塑料絕緣電力電纜》和GB12666《電線電纜燃燒實驗方法》標準生產，同時還可根據用戶需要按國際電工委員會推薦的IEC標準、英國BS標準、德國DIN標準、美國ICEA標準及日本JIS標準生產。
The product is manufactured according to the standard of GB12706 and GB12666 or IEC,BS,DIN,ICEA,and JIS upon request.
適用范圍
本產品適用于工頻額定電壓0.6/1kV及以下配電線路或工業裝置中有耐火要求的固定敷設場所使用。
The product is suitable for use in power distribution lines or fixed installations with rated power-frequency voltage up to and including 0.6/1kV.

使用特性
·工頻額定電壓U0/U:0.6/1kV。
Rated power-frequency voltage U0/U:0.6/1kV.
·電纜導體的最高允許長期工作溫度（PVC/XLPE）:70℃/90℃.
Max.permissible continuous operating temperature of conductor (PVC/XLPE): 70℃/90℃
·短路時（最長持續時間不超過5s）電纜導體最高允許溫度
PVC:導體截面≤300mm²-160℃
導體截面＞300mm²-140℃
XLPE:250℃
Max.short-circuit temperature of the conductor shall not exceed(5s maxiumduration):
PVC:cross-section of conductor≤300mm²-160℃
cross-section of conductor＞300mm²-140℃
XLPE:250℃
·電纜敷設時環境溫度應不低于0℃
The ambient temperature under installation should not below 0℃
·電纜的彎曲半徑：多芯電纜不小于電纜外徑15倍，單芯電纜不小于電纜外徑20倍。
The bending radius of a single-core cable should not less than 20 times of the cable diameter.
The bending radius of multicore-cable should not less than 15 times of the cable diameter.

電纜的型號Type of cable

　

　

結構尺寸及主要技術參數Construction and main technical data
·0.6/1kV單芯耐火電力電纜（NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV）
0.6/1kV Single-core Fire Resistance Power Cable

　

注：*表示導體為緊壓圓形線芯。
Where：*=Compact circular stranded conductor.

本產品按GB12706《額定電壓35kV及以下銅芯、鋁芯塑料絕緣電力電纜》和GB12666《電線電纜燃燒實驗方法》標準生產，同時還可根據用戶需要按國際電工委員會推薦的IEC標準、英國BS標準、德國DIN標準、美國ICEA標準及日本JIS標準生產。
The product is manufactured according to the standard of GB12706 and GB12666 or IEC,BS,DIN,ICEA,and JIS upon request.
適用范圍
本產品適用于工頻額定電壓0.6/1kV及以下配電線路或工業裝置中有耐火要求的固定敷設場所使用。
The product is suitable for use in power distribution lines or fixed installations with rated power-frequency voltage up to and including 0.6/1kV.

使用特性
·工頻額定電壓U0/U:0.6/1kV。
Rated power-frequency voltage U0/U:0.6/1kV.
·電纜導體的最高允許長期工作溫度（PVC/XLPE）:70℃/90℃.
Max.permissible continuous operating temperature of conductor (PVC/XLPE): 70℃/90℃
·短路時（最長持續時間不超過5s）電纜導體最高允許溫度
PVC:導體截面≤300mm²-160℃
導體截面＞300mm²-140℃
XLPE:250℃
Max.short-circuit temperature of the conductor shall not exceed(5s maxiumduration):
PVC:cross-section of conductor≤300mm²-160℃
cross-section of conductor＞300mm²-140℃
XLPE:250℃
·電纜敷設時環境溫度應不低于0℃
The ambient temperature under installation should not below 0℃
·電纜的彎曲半徑：多芯電纜不小于電纜外徑15倍，單芯電纜不小于電纜外徑20倍。
The bending radius of a single-core cable should not less than 20 times of the cable diameter.
The bending radius of multicore-cable should not less than 15 times of the cable diameter.

電纜的型號Type of cable

　

　

結構尺寸及主要技術參數Construction and main technical data
·0.6/1kV單芯耐火電力電纜（NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV）
0.6/1kV Single-core Fire Resistance Power Cable

　

注：*表示導體為緊壓圓形線芯。
Where：*=Compact circular stranded conductor.

本產品按GB12706《額定電壓35kV及以下銅芯、鋁芯塑料絕緣電力電纜》和GB12666《電線電纜燃燒實驗方法》標準生產，同時還可根據用戶需要按國際電工委員會推薦的IEC標準、英國BS標準、德國DIN標準、美國ICEA標準及日本JIS標準生產。
The product is manufactured according to the standard of GB12706 and GB12666 or IEC,BS,DIN,ICEA,and JIS upon request.
適用范圍
本產品適用于工頻額定電壓0.6/1kV及以下配電線路或工業裝置中有耐火要求的固定敷設場所使用。
The product is suitable for use in power distribution lines or fixed installations with rated power-frequency voltage up to and including 0.6/1kV.

使用特性
·工頻額定電壓U0/U:0.6/1kV。
Rated power-frequency voltage U0/U:0.6/1kV.
·電纜導體的最高允許長期工作溫度（PVC/XLPE）:70℃/90℃.
Max.permissible continuous operating temperature of conductor (PVC/XLPE): 70℃/90℃
·短路時（最長持續時間不超過5s）電纜導體最高允許溫度
PVC:導體截面≤300mm²-160℃
導體截面＞300mm²-140℃
XLPE:250℃
Max.short-circuit temperature of the conductor shall not exceed(5s maxiumduration):
PVC:cross-section of conductor≤300mm²-160℃
cross-section of conductor＞300mm²-140℃
XLPE:250℃
·電纜敷設時環境溫度應不低于0℃
The ambient temperature under installation should not below 0℃
·電纜的彎曲半徑：多芯電纜不小于電纜外徑15倍，單芯電纜不小于電纜外徑20倍。
The bending radius of a single-core cable should not less than 20 times of the cable diameter.
The bending radius of multicore-cable should not less than 15 times of the cable diameter.

電纜的型號Type of cable

　

　

結構尺寸及主要技術參數Construction and main technical data
·0.6/1kV單芯耐火電力電纜（NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV）
0.6/1kV Single-core Fire Resistance Power Cable

　

注：*表示導體為緊壓圓形線芯。
Where：*=Compact circular stranded conductor.

本產品按GB12706《額定電壓35kV及以下銅芯、鋁芯塑料絕緣電力電纜》和GB12666《電線電纜燃燒實驗方法》標準生產，同時還可根據用戶需要按國際電工委員會推薦的IEC標準、英國BS標準、德國DIN標準、美國ICEA標準及日本JIS標準生產。
The product is manufactured according to the standard of GB12706 and GB12666 or IEC,BS,DIN,ICEA,and JIS upon request.
適用范圍
本產品適用于工頻額定電壓0.6/1kV及以下配電線路或工業裝置中有耐火要求的固定敷設場所使用。
The product is suitable for use in power distribution lines or fixed installations with rated power-frequency voltage up to and including 0.6/1kV.

使用特性
·工頻額定電壓U0/U:0.6/1kV。
Rated power-frequency voltage U0/U:0.6/1kV.
·電纜導體的最高允許長期工作溫度（PVC/XLPE）:70℃/90℃.
Max.permissible continuous operating temperature of conductor (PVC/XLPE): 70℃/90℃
·短路時（最長持續時間不超過5s）電纜導體最高允許溫度
PVC:導體截面≤300mm²-160℃
導體截面＞300mm²-140℃
XLPE:250℃
Max.short-circuit temperature of the conductor shall not exceed(5s maxiumduration):
PVC:cross-section of conductor≤300mm²-160℃
cross-section of conductor＞300mm²-140℃
XLPE:250℃
·電纜敷設時環境溫度應不低于0℃
The ambient temperature under installation should not below 0℃
·電纜的彎曲半徑：多芯電纜不小于電纜外徑15倍，單芯電纜不小于電纜外徑20倍。
The bending radius of a single-core cable should not less than 20 times of the cable diameter.
The bending radius of multicore-cable should not less than 15 times of the cable diameter.

電纜的型號Type of cable

　

　

結構尺寸及主要技術參數Construction and main technical data
·0.6/1kV單芯耐火電力電纜（NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV）
0.6/1kV Single-core Fire Resistance Power Cable

　

注：*表示導體為緊壓圓形線芯。
Where：*=Compact circular stranded conductor.

本產品按GB12706《額定電壓35kV及以下銅芯、鋁芯塑料絕緣電力電纜》和GB12666《電線電纜燃燒實驗方法》標準生產，同時還可根據用戶需要按國際電工委員會推薦的IEC標準、英國BS標準、德國DIN標準、美國ICEA標準及日本JIS標準生產。
The product is manufactured according to the standard of GB12706 and GB12666 or IEC,BS,DIN,ICEA,and JIS upon request.
適用范圍
本產品適用于工頻額定電壓0.6/1kV及以下配電線路或工業裝置中有耐火要求的固定敷設場所使用。
The product is suitable for use in power distribution lines or fixed installations with rated power-frequency voltage up to and including 0.6/1kV.

使用特性
·工頻額定電壓U0/U:0.6/1kV。
Rated power-frequency voltage U0/U:0.6/1kV.
·電纜導體的最高允許長期工作溫度（PVC/XLPE）:70℃/90℃.
Max.permissible continuous operating temperature of conductor (PVC/XLPE): 70℃/90℃
·短路時（最長持續時間不超過5s）電纜導體最高允許溫度
PVC:導體截面≤300mm²-160℃
導體截面＞300mm²-140℃
XLPE:250℃
Max.short-circuit temperature of the conductor shall not exceed(5s maxiumduration):
PVC:cross-section of conductor≤300mm²-160℃
cross-section of conductor＞300mm²-140℃
XLPE:250℃
·電纜敷設時環境溫度應不低于0℃
The ambient temperature under installation should not below 0℃
·電纜的彎曲半徑：多芯電纜不小于電纜外徑15倍，單芯電纜不小于電纜外徑20倍。
The bending radius of a single-core cable should not less than 20 times of the cable diameter.
The bending radius of multicore-cable should not less than 15 times of the cable diameter.

電纜的型號Type of cable

　

　

結構尺寸及主要技術參數Construction and main technical data
·0.6/1kV單芯耐火電力電纜（NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV）
0.6/1kV Single-core Fire Resistance Power Cable

　

注：*表示導體為緊壓圓形線芯。
Where：*=Compact circular stranded conductor.

本產品按GB12706《額定電壓35kV及以下銅芯、鋁芯塑料絕緣電力電纜》和GB12666《電線電纜燃燒實驗方法》標準生產，同時還可根據用戶需要按國際電工委員會推薦的IEC標準、英國BS標準、德國DIN標準、美國ICEA標準及日本JIS標準生產。
The product is manufactured according to the standard of GB12706 and GB12666 or IEC,BS,DIN,ICEA,and JIS upon request.
適用范圍
本產品適用于工頻額定電壓0.6/1kV及以下配電線路或工業裝置中有耐火要求的固定敷設場所使用。
The product is suitable for use in power distribution lines or fixed installations with rated power-frequency voltage up to and including 0.6/1kV.

使用特性
·工頻額定電壓U0/U:0.6/1kV。
Rated power-frequency voltage U0/U:0.6/1kV.
·電纜導體的最高允許長期工作溫度（PVC/XLPE）:70℃/90℃.
Max.permissible continuous operating temperature of conductor (PVC/XLPE): 70℃/90℃
·短路時（最長持續時間不超過5s）電纜導體最高允許溫度
PVC:導體截面≤300mm²-160℃
導體截面＞300mm²-140℃
XLPE:250℃
Max.short-circuit temperature of the conductor shall not exceed(5s maxiumduration):
PVC:cross-section of conductor≤300mm²-160℃
cross-section of conductor＞300mm²-140℃
XLPE:250℃
·電纜敷設時環境溫度應不低于0℃
The ambient temperature under installation should not below 0℃
·電纜的彎曲半徑：多芯電纜不小于電纜外徑15倍，單芯電纜不小于電纜外徑20倍。
The bending radius of a single-core cable should not less than 20 times of the cable diameter.
The bending radius of multicore-cable should not less than 15 times of the cable diameter.

電纜的型號Type of cable

　

　

結構尺寸及主要技術參數Construction and main technical data
·0.6/1kV單芯耐火電力電纜（NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV）
0.6/1kV Single-core Fire Resistance Power Cable

　

注：*表示導體為緊壓圓形線芯。
Where：*=Compact circular stranded conductor.

礦用屏蔽控制電纜（MKVVP電纜）、、
本產品按GB12706《額定電壓35kV及以下銅芯、鋁芯塑料絕緣電力電纜》和GB12666《電線電纜燃燒實驗方法》標準生產，同時還可根據用戶需要按國際電工委員會推薦的IEC標準、英國BS標準、德國DIN標準、美國ICEA標準及日本JIS標準生產。
The product is manufactured according to the standard of GB12706 and GB12666 or IEC,BS,DIN,ICEA,and JIS upon request.
適用范圍
本產品適用于工頻額定電壓0.6/1kV及以下配電線路或工業裝置中有耐火要求的固定敷設場所使用。
The product is suitable for use in power distribution lines or fixed installations with rated power-frequency voltage up to and including 0.6/1kV.

使用特性
·工頻額定電壓U0/U:0.6/1kV。
Rated power-frequency voltage U0/U:0.6/1kV.
·電纜導體的最高允許長期工作溫度（PVC/XLPE）:70℃/90℃.
Max.permissible continuous operating temperature of conductor (PVC/XLPE): 70℃/90℃
·短路時（最長持續時間不超過5s）電纜導體最高允許溫度
PVC:導體截面≤300mm²-160℃
導體截面＞300mm²-140℃
XLPE:250℃
Max.short-circuit temperature of the conductor shall not exceed(5s maxiumduration):
PVC:cross-section of conductor≤300mm²-160℃
cross-section of conductor＞300mm²-140℃
XLPE:250℃
·電纜敷設時環境溫度應不低于0℃
The ambient temperature under installation should not below 0℃
·電纜的彎曲半徑：多芯電纜不小于電纜外徑15倍，單芯電纜不小于電纜外徑20倍。
The bending radius of a single-core cable should not less than 20 times of the cable diameter.
The bending radius of multicore-cable should not less than 15 times of the cable diameter.

電纜的型號Type of cable

　

　

結構尺寸及主要技術參數Construction and main technical data
·0.6/1kV單芯耐火電力電纜（NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV）
0.6/1kV Single-core Fire Resistance Power Cable

　

注：*表示導體為緊壓圓形線芯。
Where：*=Compact circular stranded conductor.

本產品按GB12706《額定電壓35kV及以下銅芯、鋁芯塑料絕緣電力電纜》和GB12666《電線電纜燃燒實驗方法》標準生產，同時還可根據用戶需要按國際電工委員會推薦的IEC標準、英國BS標準、德國DIN標準、美國ICEA標準及日本JIS標準生產。
The product is manufactured according to the standard of GB12706 and GB12666 or IEC,BS,DIN,ICEA,and JIS upon request.
適用范圍
本產品適用于工頻額定電壓0.6/1kV及以下配電線路或工業裝置中有耐火要求的固定敷設場所使用。
The product is suitable for use in power distribution lines or fixed installations with rated power-frequency voltage up to and including 0.6/1kV.

使用特性
·工頻額定電壓U0/U:0.6/1kV。
Rated power-frequency voltage U0/U:0.6/1kV.
·電纜導體的最高允許長期工作溫度（PVC/XLPE）:70℃/90℃.
Max.permissible continuous operating temperature of conductor (PVC/XLPE): 70℃/90℃
·短路時（最長持續時間不超過5s）電纜導體最高允許溫度
PVC:導體截面≤300mm²-160℃
導體截面＞300mm²-140℃
XLPE:250℃
Max.short-circuit temperature of the conductor shall not exceed(5s maxiumduration):
PVC:cross-section of conductor≤300mm²-160℃
cross-section of conductor＞300mm²-140℃
XLPE:250℃
·電纜敷設時環境溫度應不低于0℃
The ambient temperature under installation should not below 0℃
·電纜的彎曲半徑：多芯電纜不小于電纜外徑15倍，單芯電纜不小于電纜外徑20倍。
The bending radius of a single-core cable should not less than 20 times of the cable diameter.
The bending radius of multicore-cable should not less than 15 times of the cable diameter.

電纜的型號Type of cable

　

　

結構尺寸及主要技術參數Construction and main technical data
·0.6/1kV單芯耐火電力電纜（NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV）
0.6/1kV Single-core Fire Resistance Power Cable

　

注：*表示導體為緊壓圓形線芯。
Where：*=Compact circular stranded conductor.

本產品按GB12706《額定電壓35kV及以下銅芯、鋁芯塑料絕緣電力電纜》和GB12666《電線電纜燃燒實驗方法》標準生產，同時還可根據用戶需要按國際電工委員會推薦的IEC標準、英國BS標準、德國DIN標準、美國ICEA標準及日本JIS標準生產。
The product is manufactured according to the standard of GB12706 and GB12666 or IEC,BS,DIN,ICEA,and JIS upon request.
適用范圍
本產品適用于工頻額定電壓0.6/1kV及以下配電線路或工業裝置中有耐火要求的固定敷設場所使用。
The product is suitable for use in power distribution lines or fixed installations with rated power-frequency voltage up to and including 0.6/1kV.

使用特性
·工頻額定電壓U0/U:0.6/1kV。
Rated power-frequency voltage U0/U:0.6/1kV.
·電纜導體的最高允許長期工作溫度（PVC/XLPE）:70℃/90℃.
Max.permissible continuous operating temperature of conductor (PVC/XLPE): 70℃/90℃
·短路時（最長持續時間不超過5s）電纜導體最高允許溫度
PVC:導體截面≤300mm²-160℃
導體截面＞300mm²-140℃
XLPE:250℃
Max.short-circuit temperature of the conductor shall not exceed(5s maxiumduration):
PVC:cross-section of conductor≤300mm²-160℃
cross-section of conductor＞300mm²-140℃
XLPE:250℃
·電纜敷設時環境溫度應不低于0℃
The ambient temperature under installation should not below 0℃
·電纜的彎曲半徑：多芯電纜不小于電纜外徑15倍，單芯電纜不小于電纜外徑20倍。
The bending radius of a single-core cable should not less than 20 times of the cable diameter.
The bending radius of multicore-cable should not less than 15 times of the cable diameter.

電纜的型號Type of cable

　

　

結構尺寸及主要技術參數Construction and main technical data
·0.6/1kV單芯耐火電力電纜（NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV）
0.6/1kV Single-core Fire Resistance Power Cable

　

注：*表示導體為緊壓圓形線芯。
Where：*=Compact circular stranded conductor.

本產品按GB12706《額定電壓35kV及以下銅芯、鋁芯塑料絕緣電力電纜》和GB12666《電線電纜燃燒實驗方法》標準生產，同時還可根據用戶需要按國際電工委員會推薦的IEC標準、英國BS標準、德國DIN標準、美國ICEA標準及日本JIS標準生產。
The product is manufactured according to the standard of GB12706 and GB12666 or IEC,BS,DIN,ICEA,and JIS upon request.
適用范圍
本產品適用于工頻額定電壓0.6/1kV及以下配電線路或工業裝置中有耐火要求的固定敷設場所使用。
The product is suitable for use in power distribution lines or fixed installations with rated power-frequency voltage up to and including 0.6/1kV.

使用特性
·工頻額定電壓U0/U:0.6/1kV。
Rated power-frequency voltage U0/U:0.6/1kV.
·電纜導體的最高允許長期工作溫度（PVC/XLPE）:70℃/90℃.
Max.permissible continuous operating temperature of conductor (PVC/XLPE): 70℃/90℃
·短路時（最長持續時間不超過5s）電纜導體最高允許溫度
PVC:導體截面≤300mm²-160℃
導體截面＞300mm²-140℃
XLPE:250℃
Max.short-circuit temperature of the conductor shall not exceed(5s maxiumduration):
PVC:cross-section of conductor≤300mm²-160℃
cross-section of conductor＞300mm²-140℃
XLPE:250℃
·電纜敷設時環境溫度應不低于0℃
The ambient temperature under installation should not below 0℃
·電纜的彎曲半徑：多芯電纜不小于電纜外徑15倍，單芯電纜不小于電纜外徑20倍。
The bending radius of a single-core cable should not less than 20 times of the cable diameter.
The bending radius of multicore-cable should not less than 15 times of the cable diameter.

電纜的型號Type of cable

　

　

結構尺寸及主要技術參數Construction and main technical data
·0.6/1kV單芯耐火電力電纜（NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV）
0.6/1kV Single-core Fire Resistance Power Cable

　

注：*表示導體為緊壓圓形線芯。
Where：*=Compact circular stranded conductor.

本產品按GB12706《額定電壓35kV及以下銅芯、鋁芯塑料絕緣電力電纜》和GB12666《電線電纜燃燒實驗方法》標準生產，同時還可根據用戶需要按國際電工委員會推薦的IEC標準、英國BS標準、德國DIN標準、美國ICEA標準及日本JIS標準生產。
The product is manufactured according to the standard of GB12706 and GB12666 or IEC,BS,DIN,ICEA,and JIS upon request.
適用范圍
本產品適用于工頻額定電壓0.6/1kV及以下配電線路或工業裝置中有耐火要求的固定敷設場所使用。
The product is suitable for use in power distribution lines or fixed installations with rated power-frequency voltage up to and including 0.6/1kV.

使用特性
·工頻額定電壓U0/U:0.6/1kV。
Rated power-frequency voltage U0/U:0.6/1kV.
·電纜導體的最高允許長期工作溫度（PVC/XLPE）:70℃/90℃.
Max.permissible continuous operating temperature of conductor (PVC/XLPE): 70℃/90℃
·短路時（最長持續時間不超過5s）電纜導體最高允許溫度
PVC:導體截面≤300mm²-160℃
導體截面＞300mm²-140℃
XLPE:250℃
Max.short-circuit temperature of the conductor shall not exceed(5s maxiumduration):
PVC:cross-section of conductor≤300mm²-160℃
cross-section of conductor＞300mm²-140℃
XLPE:250℃
·電纜敷設時環境溫度應不低于0℃
The ambient temperature under installation should not below 0℃
·電纜的彎曲半徑：多芯電纜不小于電纜外徑15倍，單芯電纜不小于電纜外徑20倍。
The bending radius of a single-core cable should not less than 20 times of the cable diameter.
The bending radius of multicore-cable should not less than 15 times of the cable diameter.

電纜的型號Type of cable

　

　

結構尺寸及主要技術參數Construction and main technical data
·0.6/1kV單芯耐火電力電纜（NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV）
0.6/1kV Single-core Fire Resistance Power Cable

　

注：*表示導體為緊壓圓形線芯。
Where：*=Compact circular stranded conductor.

本產品按GB12706《額定電壓35kV及以下銅芯、鋁芯塑料絕緣電力電纜》和GB12666《電線電纜燃燒實驗方法》標準生產，同時還可根據用戶需要按國際電工委員會推薦的IEC標準、英國BS標準、德國DIN標準、美國ICEA標準及日本JIS標準生產。
The product is manufactured according to the standard of GB12706 and GB12666 or IEC,BS,DIN,ICEA,and JIS upon request.
適用范圍
本產品適用于工頻額定電壓0.6/1kV及以下配電線路或工業裝置中有耐火要求的固定敷設場所使用。
The product is suitable for use in power distribution lines or fixed installations with rated power-frequency voltage up to and including 0.6/1kV.

使用特性
·工頻額定電壓U0/U:0.6/1kV。
Rated power-frequency voltage U0/U:0.6/1kV.
·電纜導體的最高允許長期工作溫度（PVC/XLPE）:70℃/90℃.
Max.permissible continuous operating temperature of conductor (PVC/XLPE): 70℃/90℃
·短路時（最長持續時間不超過5s）電纜導體最高允許溫度
PVC:導體截面≤300mm²-160℃
導體截面＞300mm²-140℃
XLPE:250℃
Max.short-circuit temperature of the conductor shall not exceed(5s maxiumduration):
PVC:cross-section of conductor≤300mm²-160℃
cross-section of conductor＞300mm²-140℃
XLPE:250℃
·電纜敷設時環境溫度應不低于0℃
The ambient temperature under installation should not below 0℃
·電纜的彎曲半徑：多芯電纜不小于電纜外徑15倍，單芯電纜不小于電纜外徑20倍。
The bending radius of a single-core cable should not less than 20 times of the cable diameter.
The bending radius of multicore-cable should not less than 15 times of the cable diameter.

電纜的型號Type of cable

　

　

結構尺寸及主要技術參數Construction and main technical data
·0.6/1kV單芯耐火電力電纜（NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV）
0.6/1kV Single-core Fire Resistance Power Cable

　

注：*表示導體為緊壓圓形線芯。
Where：*=Compact circular stranded conductor.

本產品按GB12706《額定電壓35kV及以下銅芯、鋁芯塑料絕緣電力電纜》和GB12666《電線電纜燃燒實驗方法》標準生產，同時還可根據用戶需要按國際電工委員會推薦的IEC標準、英國BS標準、德國DIN標準、美國ICEA標準及日本JIS標準生產。
The product is manufactured according to the standard of GB12706 and GB12666 or IEC,BS,DIN,ICEA,and JIS upon request.
適用范圍
本產品適用于工頻額定電壓0.6/1kV及以下配電線路或工業裝置中有耐火要求的固定敷設場所使用。
The product is suitable for use in power distribution lines or fixed installations with rated power-frequency voltage up to and including 0.6/1kV.

使用特性
·工頻額定電壓U0/U:0.6/1kV。
Rated power-frequency voltage U0/U:0.6/1kV.
·電纜導體的最高允許長期工作溫度（PVC/XLPE）:70℃/90℃.
Max.permissible continuous operating temperature of conductor (PVC/XLPE): 70℃/90℃
·短路時（最長持續時間不超過5s）電纜導體最高允許溫度
PVC:導體截面≤300mm²-160℃
導體截面＞300mm²-140℃
XLPE:250℃
Max.short-circuit temperature of the conductor shall not exceed(5s maxiumduration):
PVC:cross-section of conductor≤300mm²-160℃
cross-section of conductor＞300mm²-140℃
XLPE:250℃
·電纜敷設時環境溫度應不低于0℃
The ambient temperature under installation should not below 0℃
·電纜的彎曲半徑：多芯電纜不小于電纜外徑15倍，單芯電纜不小于電纜外徑20倍。
The bending radius of a single-core cable should not less than 20 times of the cable diameter.
The bending radius of multicore-cable should not less than 15 times of the cable diameter.

電纜的型號Type of cable

　

　

結構尺寸及主要技術參數Construction and main technical data
·0.6/1kV單芯耐火電力電纜（NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV）
0.6/1kV Single-core Fire Resistance Power Cable

　

注：*表示導體為緊壓圓形線芯。
Where：*=Compact circular stranded conductor.

本產品按GB12706《額定電壓35kV及以下銅芯、鋁芯塑料絕緣電力電纜》和GB12666《電線電纜燃燒實驗方法》標準生產，同時還可根據用戶需要按國際電工委員會推薦的IEC標準、英國BS標準、德國DIN標準、美國ICEA標準及日本JIS標準生產。
The product is manufactured according to the standard of GB12706 and GB12666 or IEC,BS,DIN,ICEA,and JIS upon request.
適用范圍
本產品適用于工頻額定電壓0.6/1kV及以下配電線路或工業裝置中有耐火要求的固定敷設場所使用。
The product is suitable for use in power distribution lines or fixed installations with rated power-frequency voltage up to and including 0.6/1kV.

使用特性
·工頻額定電壓U0/U:0.6/1kV。
Rated power-frequency voltage U0/U:0.6/1kV.
·電纜導體的最高允許長期工作溫度（PVC/XLPE）:70℃/90℃.
Max.permissible continuous operating temperature of conductor (PVC/XLPE): 70℃/90℃
·短路時（最長持續時間不超過5s）電纜導體最高允許溫度
PVC:導體截面≤300mm²-160℃
導體截面＞300mm²-140℃
XLPE:250℃
Max.short-circuit temperature of the conductor shall not exceed(5s maxiumduration):
PVC:cross-section of conductor≤300mm²-160℃
cross-section of conductor＞300mm²-140℃
XLPE:250℃
·電纜敷設時環境溫度應不低于0℃
The ambient temperature under installation should not below 0℃
·電纜的彎曲半徑：多芯電纜不小于電纜外徑15倍，單芯電纜不小于電纜外徑20倍。
The bending radius of a single-core cable should not less than 20 times of the cable diameter.
The bending radius of multicore-cable should not less than 15 times of the cable diameter.

電纜的型號Type of cable

　

　

結構尺寸及主要技術參數Construction and main technical data
·0.6/1kV單芯耐火電力電纜（NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV）
0.6/1kV Single-core Fire Resistance Power Cable

　

注：*表示導體為緊壓圓形線芯。
Where：*=Compact circular stranded conductor.

本產品按GB12706《額定電壓35kV及以下銅芯、鋁芯塑料絕緣電力電纜》和GB12666《電線電纜燃燒實驗方法》標準生產，同時還可根據用戶需要按國際電工委員會推薦的IEC標準、英國BS標準、德國DIN標準、美國ICEA標準及日本JIS標準生產。
The product is manufactured according to the standard of GB12706 and GB12666 or IEC,BS,DIN,ICEA,and JIS upon request.
適用范圍
本產品適用于工頻額定電壓0.6/1kV及以下配電線路或工業裝置中有耐火要求的固定敷設場所使用。
The product is suitable for use in power distribution lines or fixed installations with rated power-frequency voltage up to and including 0.6/1kV.

使用特性
·工頻額定電壓U0/U:0.6/1kV。
Rated power-frequency voltage U0/U:0.6/1kV.
·電纜導體的最高允許長期工作溫度（PVC/XLPE）:70℃/90℃.
Max.permissible continuous operating temperature of conductor (PVC/XLPE): 70℃/90℃
·短路時（最長持續時間不超過5s）電纜導體最高允許溫度
PVC:導體截面≤300mm²-160℃
導體截面＞300mm²-140℃
XLPE:250℃
Max.short-circuit temperature of the conductor shall not exceed(5s maxiumduration):
PVC:cross-section of conductor≤300mm²-160℃
cross-section of conductor＞300mm²-140℃
XLPE:250℃
·電纜敷設時環境溫度應不低于0℃
The ambient temperature under installation should not below 0℃
·電纜的彎曲半徑：多芯電纜不小于電纜外徑15倍，單芯電纜不小于電纜外徑20倍。
The bending radius of a single-core cable should not less than 20 times of the cable diameter.
The bending radius of multicore-cable should not less than 15 times of the cable diameter.

電纜的型號Type of cable

　

　

結構尺寸及主要技術參數Construction and main technical data
·0.6/1kV單芯耐火電力電纜（NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV）
0.6/1kV Single-core Fire Resistance Power Cable

　

注：*表示導體為緊壓圓形線芯。
Where：*=Compact circular stranded conductor.

本產品按GB12706《額定電壓35kV及以下銅芯、鋁芯塑料絕緣電力電纜》和GB12666《電線電纜燃燒實驗方法》標準生產，同時還可根據用戶需要按國際電工委員會推薦的IEC標準、英國BS標準、德國DIN標準、美國ICEA標準及日本JIS標準生產。
The product is manufactured according to the standard of GB12706 and GB12666 or IEC,BS,DIN,ICEA,and JIS upon request.
適用范圍
本產品適用于工頻額定電壓0.6/1kV及以下配電線路或工業裝置中有耐火要求的固定敷設場所使用。
The product is suitable for use in power distribution lines or fixed installations with rated power-frequency voltage up to and including 0.6/1kV.

使用特性
·工頻額定電壓U0/U:0.6/1kV。
Rated power-frequency voltage U0/U:0.6/1kV.
·電纜導體的最高允許長期工作溫度（PVC/XLPE）:70℃/90℃.
Max.permissible continuous operating temperature of conductor (PVC/XLPE): 70℃/90℃
·短路時（最長持續時間不超過5s）電纜導體最高允許溫度
PVC:導體截面≤300mm2-160℃
導體截面＞300mm2-140℃
XLPE:250℃
Max.short-circuit temperature of the conductor shall not exceed(5s maxiumduration):
PVC:cross-section of conductor≤300mm2-160℃
cross-section of conductor＞300mm2-140℃
XLPE:250℃
·電纜敷設時環境溫度應不低于0℃
The ambient temperature under installation should not below 0℃
·電纜的彎曲半徑：多芯電纜不小于電纜外徑15倍，單芯電纜不小于電纜外徑20倍。
The bending radius of a single-core cable should not less than 20 times of the cable diameter.
The bending radius of multicore-cable should not less than 15 times of the cable diameter.

電纜的型號Type of cable
　
　
結構尺寸及主要技術參數Construction and main technical data
·0.6/1kV單芯耐火電力電纜（NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV）
0.6/1kV Single-core Fire Resistance Power Cable
　
注：*表示導體為緊壓圓形線芯。
Where：*=Compact circular stranded conductor.
公司全稱：天津市電纜總廠橡塑電纜廠

生產廠區：河北省大城縣劉演馬工業區

電話 ：0316-3267066

手機 ：18231608566

傳真：0316-3267058

組織機構代碼證：10951028-2

CCC認 證編號：2003010104099693

營業執照注冊號：131025100000860

稅務 登記證：131025109510282

開 戶 銀行：河北省大城縣劉固獻農村信用合作社

匯款帳號：91608040020110005316

在線詢盤/留言

*您的姓名：

*聯系手機：

*固定電話：

*聯系郵箱：

*所在單位：

*需求數量：

咨詢內容：

您要求給廠家提供：