亚洲精品大片,欧美另类暴力丝袜,69精品人人人人

您當前位置: 網站首頁 / 供應信息 / 工控 / PLC控制系統

上架日期： 2018年7月16日瀏覽量： 99次

崇安區 6SL3040-0JA00-0AA0

產品價格：￥88（人民幣）

規格：6SL3040-0JA00-0AA0

發貨地：上海

品牌：

最小起訂量：1件

QQ洽談點擊詢價進入商鋪

上海斌勤電氣技術有限公司

誠信商家

會員級別：

認證類型：企業認證

企業證件：通過認證

認證信息：上海斌勤電氣技術有限公司

商鋪名稱：上海斌勤電氣技術有限公司

聯系人：康奎（先生）

聯系手機：

固定電話：

企業郵箱：192061030@qq.com

聯系地址：上海市松江區三新北路1800弄（松江電子商務園區）

郵編：201501

聯系我時，請說是在線纜網上看到的，謝謝！

商品詳情

崇安區 6SL3040-0JA00-0AA0

6SL3040-0JA00-0AA0

SINAMICS S110 控制單元 CU305 DP 帶 PROFIBUS 接口不帶存儲卡

概述

CU305 PN Control Unit

The CU305 Control Unit for the communication and open-loop/closed-loop control functions of a SINAMICS S110 is combined with the PM240?2 Power Module in blocksize format (usable as of firmware V4.4 SP3) to create a powerful single drive.

設計

The CU305 Control Unit features the following connections and interfaces as standard:

Fieldbus interface
- CU305 PN: 1 PROFINET interface with 2 ports (RJ45 sockets) with PROFIdrive V4 profile
- CU305 DP: 1 PROFIBUS interface with PROFIdrive V4 profile
1 DRIVE-CLiQ socket, used solely to connect a DRIVE-CLiQ motor or a Sensor Module
1 onboard encoder evaluation for evaluating the following encoder signals
- Incremental encoder TTL/HTL
- SSI encoder without incremental signals
1 PE/protective conductor connection
1 connection for the electronics power supply via the 24 V DC power supply connector
1 temperature sensor input (KTY84?130 or PTC)
3 parameterizable, fail-safe digital inputs (isolated), or alternatively 6 parameterizable digital inputs (isolated)
5 parameterizable digital inputs (isolated)
1 parameterizable, fail-safe digital output (isolated), or alternatively 1 digital output (isolated)
4 parameterizable bidirectional digital inputs/outputs
1 analog input ± 10 V, resolution 12 bit + sign
1 serial RS232 interface
1 slot for the memory card on which the firmware, parameters and licenses can be stored
1 PM-IF interface for communication with the PM240?2 Power Modules in blocksize format (usable as of firmware V4.4 SP3)
2 test sockets and one reference ground for commissioning support
1 interface to the BOP20 Basic Operator Panel

集成

The CU305 Control Unit controls the PM240 2 Power Module in blocksize format (usable as of firmware V4.4 SP3) via the PM-IF interface.

A BOP20 Basic Operator Panel can also be snapped directly onto the CU305 for diagnostic purposes.

DRIVE-CLiQ motors can be connected to the integrated DRIVE-CLiQ socket as well as Sensor Modules (SMC) to permit the operation of motors without a DRIVE-CLiQ interface.

The status of the CU305 is indicated via multi-color LEDs.

The CU305 can be operated optionally with memory card. The firmware and project data are stored on the memory card pluggable from below, so that the CU305 can be replaced without the support of software tools. This memory card can also be used to perform standard commissioning on multiple drives of identical type. The card is available as an empty memory card or containing the latest drive firmware version. The card also contains the safety license for the Extended Safety Functions. To use these Extended Safety Functions, a memory card containing the safety license must be permanently inserted.

The CU305 and other connected components are commissioned and diagnosed with the STARTER commissioning tool.

Connection example of CU305 Control Unit

技術規范

CU305 PN / CU305 DP Control Units PROFINET: 6SL3040-0JA01-0AA0 PROFIBUS: 6SL3040-0JA00-0AA0
Current requirement At 24 V DC, max. without taking account of digital outputs and DRIVE-CLiQ supply	0.8 A for CU305 incl. 350 mA for HTL encoder + 0.5 A for PM240?2 Power Module
Conductor cross-section, max.	2.5 mm²
Fuse protection, max.	20 A
Digital inputs	in accordance with IEC 61131?2 Type 1 3 isolated fail-safe inputs 5 isolated digital inputs
Voltage	-3 ... +30 V
Low level (an open digital input is interpreted as "low")	-3 ... +5 V
High level	15 ... 30 V
Current consumption at 24 V DC, typ.	6 mA
Delay time of digital inputs ¹⁾, approx.
L → H	15 μs
H → L	55 μs
Delay time of high-speed digital inputs ¹⁾, approx. (high-speed digital inputs can be used for position detection)
L → H	5 μs
H → L	5 μs
Conductor cross-section, max.	1.5 mm²
Digital outputs (continuously short-circuit-proof)	1 fail-safe digital output 4 bidirectional digital inputs/digital outputs, not isolated
Voltage	24 V DC
Load current per digital output ²⁾, max.	100 mA
Delay time ¹⁾, approx.	150 μs
Conductor cross-section, max.	1.5 mm²
Analog input	-10 ... +10 V Resolution 12 bits + sign
Internal resistance	15 kΩ
Encoder evaluation	Incremental encoder TTL/HTL SSI encoder without incremental signals
Encoder supply	24 V DC/0.35 A or 5 V DC/0.35 A
Input current range TTL/HTL	2 ... 10 mA (typ. 5 mA)
Encoder frequency, max.	500 kHz
SSI baud rate	100 ... 250 kBaud depending on cable length
Resolution absolute position SSI	30 bit
Cable length, max.
TTL encoder	100 m (328 ft) (only bipolar signals permitted) ³⁾
HTL encoder	100 m (328 ft) for unipolar signals 300 m (984 ft) for bipolar signals ³⁾
SSI encoder	100 m (328 ft)
Power loss	<20 W
PE connection	M5 screw
Dimensions
Width	73 mm (2.87 in)
Height
CU305 PN	195 mm (7.68 in)
CU305 DP	183.2 mm (7.21 in)
Depth
CU305 PN	71 mm (2.80 in)
CU305 DP	55 mm (2.17 in)
Weight, approx.	0.95 kg (2.09 lb)
Certificate of suitability	cULus