久久久久久婷,中文字幕乱码日本亚洲一区二区,精品第一国产综合精品aⅴ

您當前位置: 網站首頁 / 供應信息 / 工控 / PLC控制系統

上架日期： 2018年6月26日瀏覽量： 160次

淮陰區西門子6ES7157-1AB00-0AB0

產品價格：￥88（人民幣）

規格：6ES71571AB000AB0

發貨地：上海

品牌：

最小起訂量：1臺

QQ洽談點擊詢價進入商鋪

上海斌勤電氣技術有限公司

誠信商家

會員級別：

認證類型：企業認證

企業證件：通過認證

認證信息：上海斌勤電氣技術有限公司

商鋪名稱：上海斌勤電氣技術有限公司

聯系人：康奎（先生）

聯系手機：

固定電話：

企業郵箱：192061030@qq.com

聯系地址：上海市松江區三新北路1800弄（松江電子商務園區）

郵編：201501

聯系我時，請說是在線纜網上看到的，謝謝！

商品詳情

淮陰區西門子6ES7157-1AB00-0AB0

SIEMENS（西門子）
希殿電氣技術上海有限公司
手機18621061383 電話；021-60541249

商務QQ：192061030

傳真：021-57271268

概述

BusAdapter BA 2xRJ45

BusAdapter BA 2xFC

SIMATIC ET 200SP 的接口模塊具有一個用于總線適配器的通用 PROFINET 接口。使用適宜的總線適配器，可根據特定應用的要求來調整連接類型：

對于具有中等機械負荷和 EMC 負荷的標準應用，可使用 BA 2xRJ45 總線適配器。該適配器具有用于標準 RJ45 插頭的兩個插座。
對于各個部件要承受較高機械和/或 EMC 負荷的機器與系統，建議使用 BA 2xFC 總線適配器。在此情況下，將通過 FastConnect 端子來直接連接總線電纜（與 PROFIBUS 連接器類似），這已在無數應用中得到證明。采用這種技術時，組裝極為迅速，與 RJ45 插入式連接器相比，抗振性和抗電磁干擾性均提高 4 倍。
帶有光纖電纜連接用總線適配器可用于覆蓋兩個站和/或較高 EMC 負載之間的較高電位差。

該總線適配器的另一個優點是：其目的是：修理出現問題的 RJ45 插座、后期轉用可靠的 FastConnect 技術或者光纖連接技術時，僅僅只需更換該適配器。

以下接口模塊通過總線適配器來提供 PROFINET 連接：

IM 155-6PN 標準型
IM 155-6PN 高性能型

應用

ET 200SP BusAdapter “BA-Send"

BA-Send BusAdapters are used whenever an existing ET 200SP station is to be expanded with IP67 modules of the SIMATIC ET 200AL.

The SIMATIC ET 200AL is a distributed I/O device with degree of protection IP65/67 that is easy to operate and install. Due to its high degree of protection and ruggedness as well as its small dimensions and low weight, the ET 200AL is especially suitable for use at the machine and on moving plant sections. SIMATIC ET 200AL enables the user to access digital and analog signals and IO-Link data at low cost.

SIMATIC BusAdapters

In standard applications with moderate mechanical and EMC loads, SIMATIC BusAdapters with an RJ45 interface can be used, e.g. the BusAdapter BA 2xRJ45.

For machines and systems in which higher mechanical and/or EMC loads act on the devices, a SIMATIC BusAdapter with connection via FastConnect (FC) or fiber-optic cable (SCRJ or LC) is recommended. Likewise, all SIMATIC BusAdapters with a fiber-optic cable connection (SCRJ, LC) can be used with the increased loads.

BusAdapters with connections for fiber-optic cables can be used to cover high potential differences between two stations and/or high EMC loads.

An overview of the essential properties of the PN interfaces is shown in the table below

PN interfaces for SIMATIC BusAdapters	Cable connection (FOC)	max. cable length	EMC and mechanical loading	Can be used on devices with SIMATIC BA-interface
RJ45	PROFINET copper cable, pluggable	50 m	Moderate	All
FC (FastConnect)	PROFINET copper cable, direct connection	50 m	Increased 5 times	All
SCRJ	POF (plastic) or HCS-FOC, pluggable	50 m for POF, 100 m for HCS	Increased 5 times	As from IM155-6PN HF, CPU 1512SP (F)
LC (Lucent Connector)	Multi-mode glass fiber-optic cable, pluggable	2 km	Increased 5 times	As from IM155-6PN HF, CPU 1512SP (F)

設計

可方便地將此總線適配器插到接口模塊中，然后用螺絲進行固定。

該總線適配器可配有參考標識牌。

技術規范

Article number	6ES7193-6AR00-0AA0	6ES7193-6AF00-0AA0	6ES7193-6AP00-0AA0	6ES7193-6AP20-0AA0
	ET 200SP, BUSADAPTER BA 2XRJ45	ET 200SP, BUSADAPTER BA 2XFC	ET 200SP, BUSADAPTER BA 2XSCRJ	ET 200SP, BUSADAPTER BA SCRJ/RJ45
General information
Product type designation	BA 2xRJ45	BA 2xFC	BA 2xSCRJ	BA SCRJ/RJ45
Interfaces
Number of PROFINET interfaces	1	1	1; 2 ports (switch) SCRJ FO	1; 2 ports (SCRJ + RJ45)
PROFINET IO
● Number of RJ45 ports	2			1
● Number of FC (FastConnect) connections		2
● Number of SCRJ ports	0		2	1
● Number of LC ports	0		0	0
Cable length
— PCF			100 m	100 m
— Plastic FOC (POF)			50 m	50 m
— PCF-GI			250 m	250 m
— Cu conductors	100 m	100 m		100 m
Dimensions
Width	20 mm	20 mm	20 mm	20 mm
Height	69.5 mm	69.5 mm	69.5 mm
Depth	59 mm	59 mm	59 mm
Weights
Weight, approx.	46 g	53 g	50 g	50 g

Article number	6ES7193-6AP40-0AA0	6ES7193-6AG00-0AA0	6ES7193-6AG20-0AA0	6ES7193-6AG40-0AA0
	ET 200SP, BUSADAPTER BA 2XSCRJ/FC	SIMATIC BUSADAPTER BA 2XLC	SIMATIC BUSADAPTER BA LC/RJ45	SIMATIC BUSADAPTER BA 2XLC/FC
General information
Product type designation	BA SCRJ/FC	BA 2xLC	BA LC/RJ45	BA LC/FC
Interfaces
Number of PROFINET interfaces	1; 2 ports (SCRJ + FC)	1; 2 ports (switch) LC Multimode Glass Fibre	1; 2 ports (switch) LC / RJ45	1
PROFINET IO
● Number of RJ45 ports			1
● Number of FC (FastConnect) connections	1			1
● Number of SCRJ ports	1	0	0	0
● Number of LC ports	0	2; Wavelength of 1 270 ... 1 380 nm, corresponds to 100BASE-FX	1; Wavelength of 1 270 ... 1 380 nm, corresponds to 100BASE-FX	1; Wavelength of 1 270 ... 1 380 nm, corresponds to 100BASE-FX
Cable length
— PCF	100 m
— Plastic FOC (POF)	50 m
— PCF-GI	250 m
— Cu conductors	100 m		100 m	100 m
— Multimode graded-index fiber 50/125 μm		3 km	3 km	3 km
— Multimode graded-index fiber 62.5/125 μm		3 km	3 km	3 km
Ambient conditions
Ambient temperature during operation
● min.		0 °C	0 °C	0 °C
● max.		60 °C	60 °C	60 °C
Dimensions
Width	20 mm	20 mm	20 mm	20 mm
Height	69.5 mm	69.5 mm	69.5 mm	69.5 mm
Depth	59 mm	59 mm	59 mm	59 mm
Weights
Weight, approx.	50 g	40 g	32 g	50 g

Article number		6ES7193-6AS00-0AA0
		ET 200SP, BUSADAPTER BA-SEND BA1XFC
General information
Product type designation		BA-Send 1xFC
Interfaces
PROFINET IO
Cable length
— Cu conductors		15 m; from IM firmware V3.3: between BA-send and the first ET-CONNECTION bus node and between all other bus nodes
ET-Connection
● Number of interfaces ET connection		1
● FC (FastConnect)		Yes
Ambient conditions
Ambient temperature during operation
● min.		0 °C
● max.		60 °C
Dimensions
Width		20 mm
Weights
Weight, approx.		44 g