商鋪名稱：深圳市鑫博恒業科技有限公司
聯系人：李經理（小姐）
聯系手機：
固定電話：
企業郵箱：235521054@qq.com
聯系地址：深圳市福田區華強北路華強廣場A棟17A（華強北地鐵站-A口）
郵編：518031
聯系我時，請說是在線纜網上看到的，謝謝！
PRG101-60詳細介紹
PRG101-60
高精度壓力調節器
PRG101 and PRG501
1年保修 CE
高精度壓力調節器
PRG101 and PRG501:高精度壓力調節器
PRG101-25
兩個?NPT計接口標準
高精度調節
高浮雕的能力
不受振動
通過安裝位置不受影響
設定鎖緊螺母安裝
The PRG101 and PRG501 Series pressure regulators have an advanced design, consisting of a precision measurement capsule and a high gain servo amplifier to achieve high performance. The regulator can be used in a "dead end" application and will exhaust whenever the setpoint is lowered. Changes in supply pressure have a minimal effect on regulation accuracy. The regulator can be panel or pipe mounted. The PRG101 has two gage ports available for mounting OMEGA pressure gages for local indication. The PRG501 is ideal for having a dial gage reading when the unit is panel mounted. The dial gage is exterior to the panel.
規格：
Maximum Supply (Input) Pressure: 150 psi (1000 kPa)
Minimum Supply (Input) Pressure: 3 psi above desired output pressure
Minimum Regulated Pressure: 2 psi
Media: Dry gases only (oil free) filtered to better than 25 microns
Flow Capacity: 10 SCFM max
Sensitivity: 0.005 psi
Hysteresis and Repeatability: 0.05% setting
Working Temperature: -20 to 70°C (0 to 160°F)
PRG501 Dial Gauge: Dual scale psi and bar
Response Time to 50% Load Change: 0.2 seconds
Housing: IP65 sealed, Zinc diecasting, epoxy painted
Diaphragm Material: Nitrile reinforced elastomers
Capsule Material: Beryllium copper
Mounting: Any attitude; integral mounting nut supplied
Pressure Gauge (PRG501): Phosphor bronze bourdon tube
Process Connection: ? NPT female (pneumatic only)
Number of Turns in Control Range: 2-? hand wheel turns
Weight:
PRG101: 0.75 kg (1.60 lb)
PRG501: 1.15 kg (2.50 lb)
| Model No. | Adjustable Range |
Consumption @ Mid-Range |
Regulation Accuracy (15 psi Supply Pressure Change at Midrange) |
|---|---|---|---|
| PRG101 Series with Hand-wheel Adjustment | |||
| PRG101-25 | 2 to 25 psig | 0.01 scfm | 0.1% |
| PRG101-60 | 2 to 60 psig | 0.02 scfm | 0.05% |
| PRG101-120 | 2 to 120 psig | 0.04 scfm | 0.02% |
| PRG501 Series with Dial Gauge and Hand-wheel Adjustment | |||
| PRG501-X15 | 2 to 15 psig | 0.01 scfm | 0.1% |
| PRG501-30 | 2 to 30 psig | 0.01 scfm | 0.1% |
| PRG501-60 | 2 to 60 psig | 0.02 scfm | 0.05% |
| PRG501-120 | 2 to 120 psig | 0.04 scfm | 0.02% |
產品型號 產品描述
PRG101 Series with Hand-wheel Adjustment
PRG101-25 Pressure regulator with adjustable range of 2 to 25 psig
PRG101-60 Pressure regulator with adjustable range of 2 to 60 psig
PRG101-120 Pressure regulator with adjustable range of 2 to 120 psig
PRG501 Series with Dial Gauge and Hand-wheel Adjustment
PRG501-X15 Panel mounted pressure regulator with gauge and adjustable range of 3 to 15 psig
PRG501-30 Panel mounted pressure regulator with gauge and adjustable range of 2 to 30 psig
PRG501-60 Panel mounted pressure regulator with gauge and adjustable range of 2 to 60 psig
PRG501-120 Panel mounted pressure regulator with gauge and adjustable range of 2 to 120 psig
PRG101-60
PRG101-60 相關產品
PRG101-60 技術文章
