商鋪名稱：南京杰弗瑞機械電子有限公司
聯系人：邵先生（先生）
聯系手機：
固定電話：
企業郵箱：james198212@126.com
聯系地址：江蘇省南京市白下區中山南路321號現代大廈3008室
郵編：211100
聯系我時，請說是在線纜網上看到的，謝謝！
詳細說明：
DYNASOLVE CU-7 樹脂溶解劑，電子溶解劑
Dynasolve CU-7 is a safer solvent used for removing polyimide coatings. It is used extensively in the fiber
optics industry.
General
Dynasolve CU-7 is a high flash point, proprietary solvent system designed to remove polyimide coatings from
various substrates. The product is a non-chlorinated, non-carcinogenic, non-ozone depleting solvent.
Dynasolve CU-7 can be used for extended periods without decomposition.
Applications
1. Removal of polyimide coatings from fiber optics.
2. Removal of polyimide coatings from semiconductor wafers.
3. Removal of polyimide coatings from advanced composites and various metals.
Specifications
Color: Water white
Specific Gravity: 1.03
Boiling Point: >392oF
Flash Point: 204°F (Lowest flashing component)
Directions For Use
1. Immerse material with polyimide coating into a glass or metal container, preferably stainless steel.
2. Heat for 10 minutes – 2 hours at 180-380oF. Polyimide films can differ greatly in both composition and
degree of curing and therefore a very broad parameter recommendation is required.
3. Use of ultrasonic cleaners or mechanical mixing of the solvent will speed up the removal rate.
4. The solvent works by breaking the bond between the polyimide and the substrate permitting removal of the
polyimide as a film.
5. Rinse substrate with alcohol or water and dry.
Caution and Warnings
Dynasolve CU-7 contains powerful organic solvents. It is harmful if inhaled or swallowed. Avoid breathing
vapors or mist. Keep away from heat and flame. Avoid contact with eyes and skin. Wear gloves, safety
goggles, and protective clothing when handling. Use with adequate ventilation. Refer to MSDS before use, for
disposal, or additional safe handling.
