国产三线在线,亚洲久草在线视频,9久re热视频在线精品,久久久xxx

S215磷青銅焊絲 斯米克S215磷青銅焊絲
S215磷青銅焊絲 斯米克S215磷青銅焊絲
產品價格:¥0(人民幣)
  • 規格:完善
  • 發貨地:地區快遞,物流
  • 品牌:
  • 最小起訂量:1公斤
  • 誠信商家
    會員級別:標準會員
    認證類型:企業認證
    企業證件:通過認證

    商鋪名稱:清河縣源特焊接材料有限公司

    聯系人:李經理(先生)

    聯系手機:

    固定電話:

    企業郵箱:ythc1688@163.com

    聯系地址:河北省清河縣西關

    郵編:053200

    聯系我時,請說是在線纜網上看到的,謝謝!

    商品詳情
      Copper alloys






      Cu 107紫銅
      ECu
      Red copper, atmosphere and sea water corrosion and excellent electric conductivity. Welding of red copper such as electrical copper row.
      紫銅,耐大氣,海水腐蝕,導電性好。紫銅焊接用,如導電銅排
      ECu

      Cu 207硅青銅
      ECuSi
      Silicon bronze, corrosion resistance and high strength. Welding of copper, silicon bronze and brass.
      硅青銅,耐蝕、強度高。銅、硅青銅及黃銅焊接用
      ECuSi

      Cu 227磷青銅
      ECuSnB
      Tin phosphor bronze, corrosion resistance and high strength. Welding of copper, silicon bronze and brass.
      錫磷青銅,耐蝕、強度高。銅、硅青銅及黃銅焊接用
      ECuSn-C

      Cu 237
      ECuAl
      Aluminum bronze, wear and corrosion and high strength. Welding or surfacing of copper alloys.
      鋁青銅,耐磨、耐蝕,強度高。銅合金焊接或堆焊用
      ECuAl-A2

      Aluminum alloys






      Al 109
      TAl
      Pure aluminum, excellent corrosion resistance and middle strength. Welding of pure aluminum.
      純鋁,耐蝕性好,但強度不高,純鋁焊接用
      E1100

      Al 209
      TAlSi
      Silicon aluminum, good crack resistance and wide range of usage. Welding of aluminum alloys other than aluminum magnesium alloys.
      鋁硅,抗裂性好,通用性大。鋁合金焊接用,不宜焊接鋁鎂合金
      E4043

      Al 309
      TAMn
      Manganese aluminum, corrosion resistance and high strength. Welding of aluminum alloys.
      鋁錳,強度高,耐蝕。鋁合金焊接用
      E3003

      Nickel alloys

      鎳合金
      Ni 102
      ENi-1
      Pure nickel. Welding and surfacing of nickel and nickel to steel.
      純鎳,用于鎳、鎳與鋼的焊接與堆焊
      ENi-1

      Ni 207
      ENiCu-7
      Copper nickel. Welding and surfacing of copper nickel and copper nickel to steel.
      鎳銅,用于鎳銅、鎳銅與鋼的焊接與堆焊
      ENiCu-7

      Copper

      alloys












      S 201

      紫銅焊絲
      Sn1 Si0.3Mn0.3
      Cu Rem.
      Good mechanical properties and crack resistance. Gas welding and argon arc welding of red copper.
      機械性能好,抗裂性好。紫銅氣焊及氬弧焊用
      ERCu

      S 211硅青銅
      Si3 Mn1
      Cu Rem.
      Good mechanical properties. Argon arc welding of copper alloys and MIG brazing of steel.
      機械性能好,銅合金氬弧焊及鋼的MIG釬焊用
      ERCuSi-Al

      S 212錫青銅
      Sn5 Cu Rem.
      Wear resistance. Argon arc welding of copper alloys and surfacing of steel.
      耐磨性好。銅合金氬弧焊及鋼的堆焊用
      ERCuSn-A

      S 213磷青銅焊絲
      Sn8 Cu Rem.
      Wear resistance. Argon arc welding of copper alloys and surfacing of steel.
      耐磨性好。銅合金氬弧焊及鋼的堆焊用
      ERCuSn-C

      S 214鋁青銅焊絲
      Al7.5 Cu Rem.
      Wear and corrosion resistance. Argon arc welding of copper alloys and surfacing of steel.
      耐磨、耐蝕。銅合金氬弧焊及鋼的堆焊用
      ERCuAl-A1

      S 215鐵鋁青銅
      Al9 Cu Rem.
      Wear and corrosion resistance. Argon arc welding of copper alloys and surfacing of steel.
      耐磨、耐蝕。銅合金氬弧焊及鋼的堆焊用
      ERCuAl-A2

      S 221黃銅焊絲
      Cu60 Sn1 Si0.3
      Zn Rem.
      Melting point is about 890℃. Gas welding and carbon arc welding of brass, also braze welding of copper, steel and cast iron.
      熔點約890℃。黃銅氣焊及碳弧焊用,也可釬焊銅、鋼、鑄鐵

      S 221F
      Cu60 Sn1 Si 0.3
      Zn Rem.
      S221 welding rod coated with flux.
      外涂焊劑的S221焊絲

      S 222鐵黃銅
      Cu58Sn0.9Si0.1
      Fe0.8 Zn Rem.
      Melting point is about 880℃. Gas welding and carbon arc welding of brass, also braze welding of copper, steel and cast iron.
      熔點約880℃。黃銅氣焊及碳弧焊用,也可釬焊銅、鋼、鑄鐵
      RBCuZn-C

      S 222F
      Cu58Sn0.9Si0.1
      Fe0.8 Zn Rem.
      S222 welding rod coated with flux.
      外涂焊劑的S222焊絲
      RBCuZn-C

      S 223
      Cu59 Sn0.6
      Zn Rem.
      Melting point is about 900℃. Braze welding of copper, steel and cast iron.
      熔點約900℃。銅、鋼、鑄鐵釬焊用
      RBCuZn-A

      S 224
      Cu62 Si0.5
      Zn Rem.
      Melting point is about 905℃. Gas welding and carbon arc welding of brass, also braze welding of copper, steel and cast iron.
      熔點約905℃。黃銅氣焊及碳弧焊用,也可釬焊銅、鋼、鑄鐵

      Copper
      alloys






      S 225
      Cu48 Ni10
      Zn Rem.
      Melting point is about 935℃ and high strength. Braze welding of steel, nickel and carbide alloys.
      熔點約935℃。高強度,釬焊鋼、鎳及硬質合金用
      RBCuZn-D

      S 225F
      Cu48 Ni10
      Zn Rem.
      S225 welding rod coated with flux.
      外涂焊劑的S225焊絲
      RBCuZn-D

      S 226
      Cu60 Sn0.3
      Si0.2 Zn Rem.
      Melting point is about 900℃. Gas welding of brass, also braze welding of copper, steel and cast iron.
      熔點約900℃。黃銅氣焊用,也可釬焊銅、鋼、鑄鐵

      S 227
      Cu58Sn0.9Ni0.5
      Si0.1 Fe0.8
      Zn Rem.
      Melting point is about 880℃. Gas welding and carbon arc welding of brass, also braze welding of copper, steel and cast iron.
      熔點880℃。黃銅氣焊及碳弧焊用,也可釬焊銅、鋼、鑄鐵
      RBCuZn-B

      S 229
      Cu55 Ni6 Mn4
      Zn余
      Melting point is about 920℃, high strength. Braze welding of steel, nickel and hard carbide.
      熔點約920℃。高強度,釬焊鋼、鎳及硬質合金用

      Aluminum alloys






      S 301
      Al≥99.5
      Good ductility and corrosion resistance. Gas welding and argon arc welding of pure aluminum.
      塑性好、耐蝕。純鋁氣焊、氬弧焊用
      ER1100

      S 311
      Si5 Al Rem.
      Corrosion resistance, wide range of usage. Gas welding and argon arc welding of aluminum alloys other than high magnesium alloys.
      抗裂性好,通用性大。鋁合金氣焊、氬弧焊用。不宜用高鎂合金
      ER4043

      S 321
      Mn1.3 Al Rem.
      Good corrosion resistance, weldability and ductility. Gas welding and argon arc welding of aluminum alloys.
      良好的耐蝕性、可焊性及塑性。鋁合金氣焊、氬弧焊用

      S 331
      Mg5 Mn0.4
      Al Rem.
      Corrosion resistance and high strength. Argon arc welding of aluminum alloys.
      耐蝕,強度高。鋁合金氬弧焊用

    在線詢盤/留言
  • 0571-87774297  
    主站蜘蛛池模板: 萨迦县| 牙克石市| 体育| 多伦县| 恩平市| 河东区| 扶余县| 皮山县| 建平县| 长武县| 九江县| 抚远县| 武陟县| 抚宁县| 榕江县| 怀远县| 中宁县| 吕梁市| 乌什县| 金平| 太仆寺旗| 登封市| 宜丰县| 珠海市| 察雅县| 乌兰察布市| 六枝特区| 铜陵市| 黄大仙区| 黑水县| 沾化县| 朝阳市| 疏附县| 磐安县| 冕宁县| 六安市| 奈曼旗| 徐汇区| 铜山县| 民和| 淮安市|