1、博科Brocade交換機Trunking配置具體操作步驟：
switch:admin> switchcfgtrunk 1 //開啟交換機的trunking功能
switch:admin> portcfgtrunkport 3, 1 //將3號口加入trunking
switch:admin> trunkshow //查看trunking狀態
switchCfgTrunk
Enables or disables trunking on all the ports of a switch. switchCfgTrunk 是開啟和關閉交換機trunking功能的開關命令
2、switchcfgtrunk mode
mode Specify 1 to enable trunking on all the ports on this switch. Specify 0 to disable trunking on all the ports on this switch. This operand is required. switchcfgtrunk 后面跟0或1的參數，0表示關閉trunking，1表示開啟trunking功能。
To enable trunking on a switch:
switch:admin> switchcfgtrunk 0
Committing configuration...done.
3、portCfgTrunkPort
Configures a port to enable or disable trunking.
portcfgtrunkport [slotnumber/]portnumber[,] mode
slotnumber For bladed systems only, specify the slot number of the port to be configured,followed by a slash (/). slotnumber 是在刀片系統中用到的參數，表示第幾片刀片。
portnumber Specify a port number to be configured, relative to its slot for bladed systems.Use switchShow to display a list of valid ports. portnumber 表示要配置的端口號。
mode Specify 1 to enable this port for trunking. Specify 0 to disable the port frombeing trunked. This operand is required. mode 是0和1的開關參數。
To enable a port for trunking:
switch:admin> portcfgtrunkport 3, 1
4、trunkShow
Displays trunking information.通過 trunkshow 可以看到交換機的trunking配置情況。
To display trunking information for a switch:
switch:admin> trunkshow
1: 6 -> 4 10:00:00:60:69:51:43:04 deskew 15 MASTER
2:15 -> 13 10:00:00:60:69:51:43:04 deskew 16 MASTER
12 -> 12 10:00:00:60:69:51:43:04 deskew 15
14 -> 14 10:00:00:60:69:51:43:04 deskew 17
13 -> 15 10:00:00:60:69:51:43:04 deskew 16
3:24 -> 14 10:00:00:60:69:51:42:dd deskew 15 MASTER
了解更多產品詳情，請登錄恒正同創官網：http://www.hengzhengtc.com.cn